Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes            

Sections

2

  • Disable Auto Boot
  • 1 step
  • Lower Case
  • 7 steps

Flags

0

  • BackMacBook Pro 13" Function Keys Late 2016

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For your safety, discharge your MacBook Pro’s battery before you begin this procedure. A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured.

What you need

Step 1

              Disable Auto Boot               
  • Before starting this procedure, you must disable your Mac’s Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot. This command may not work on all Macs.
  • Power on your Mac and launch Terminal.
  • Copy and paste the following command (or type it exactly) into Terminal:
  • sudo nvram AutoBoot=%00
  • Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or “enter.”
  • You can now safely power down your Mac and open the bottom case, without it accidentally powering on.
  • When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:
  • sudo nvram AutoBoot=%03

Before starting this procedure, you must disable your Mac’s Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot. This command may not work on all Macs.

Power on your Mac and launch Terminal.

Copy and paste the following command (or type it exactly) into Terminal:

sudo nvram AutoBoot=%00

Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or “enter.”

You can now safely power down your Mac and open the bottom case, without it accidentally powering on.

When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:

sudo nvram AutoBoot=%03

1024

Step 2

              Lower Case               
  • Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
  • Use a P5 Pentalobe driver to remove the six screws securing the lower case:
  • Two 6.2 mm screws
  • Two 5.3 mm screws
  • Two 3.4 mm screws
  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

Use a P5 Pentalobe driver to remove the six screws securing the lower case:

Two 6.2 mm screws

Two 5.3 mm screws

Two 3.4 mm screws

Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Step 3

  • Apply a suction handle to the lower case near the front-center area of the MacBook Pro.
  • Lift the suction handle to create a slight separation between the lower case and the chassis.

Apply a suction handle to the lower case near the front-center area of the MacBook Pro.

Lift the suction handle to create a slight separation between the lower case and the chassis.

Step 4

  • Insert one corner of an opening pick into the space between the lower case and the chassis.
  • Slide the opening pick around the nearest corner and halfway up the side of the case.
  • This releases the first of the hidden clips securing the lower case to the chassis. You should feel and hear the clip pop free.

Insert one corner of an opening pick into the space between the lower case and the chassis.

Slide the opening pick around the nearest corner and halfway up the side of the case.

This releases the first of the hidden clips securing the lower case to the chassis. You should feel and hear the clip pop free.

Step 5

  • Repeat the previous step on the opposite side, sliding your opening pick under the lower case and up the side to pop the second clip free.

Repeat the previous step on the opposite side, sliding your opening pick under the lower case and up the side to pop the second clip free.

Step 6

  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.
  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.
  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

Step 7

  • Pull the lower case firmly towards the front of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.
  • It may help to pull first at one corner, then the other.
  • This may require a lot of force.

Pull the lower case firmly towards the front of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.

It may help to pull first at one corner, then the other.

This may require a lot of force.

Step 8

  • Remove the lower case.

Remove the lower case.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Cancel: I did not complete this guide.

                                                                                      24 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jeff Suovanen                     

Member since: 08/06/2013

400,983 Reputation

                                      261 Guides authored                  



                       Badges:
                       48







                                                        +45 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored                     

M. Can - May 6, 2021

Reply

Une ventouse de fixation de crochet sur carrelage,

permet de soulever le fond du macBP.