Featured
Featured Guide
Difficulty
Easy
Steps
5
Time Required
7 - 10 minutes
Sections
3
- Battery
- 2 steps
- Memory Cover
- 2 steps
- RAM
- 1 step
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackMacBook Core Duo
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
1024
Step 2
- Lift the battery out of the computer.
Lift the battery out of the computer.
Step 3
Memory Cover
- Remove the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.
- The screws are captive to the metal memory cover.
- When replacing the battery casing, use a spudger to re-insert the foam cushioning behind the rear wall for propper battery spacing.
Remove the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.
The screws are captive to the metal memory cover.
When replacing the battery casing, use a spudger to re-insert the foam cushioning behind the rear wall for propper battery spacing.
Step 4
- Lift up on L-shaped memory cover, slide it to the right, and lift it out of the computer.
Lift up on L-shaped memory cover, slide it to the right, and lift it out of the computer.
Step 5
RAM
- In one swift but careful motion, flick the levers to the left and slide the RAM chip out from its compartment.
- Unlike the iBook line, the MacBook has two RAM slots, which allows for up to 2 GBs of memory.
In one swift but careful motion, flick the levers to the left and slide the RAM chip out from its compartment.
Unlike the iBook line, the MacBook has two RAM slots, which allows for up to 2 GBs of memory.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
127 other people completed this guide.
Author
with 5 other contributors
iRobot
Member since: 09/24/2009
1 Reputation
646 Guides authored
Badges:
36
+33 more badges
Madeleine - Jan 22, 2012
Reply
I followed these direction to upgrade my ram from 2 512MB chips to 2 1GB chips. They were simple, but I hit a snag somewhere because when I went to turn back on my computer the light on the slide just blinked several times and no start up ocurred. How do you know that the new RAM chips are in sufficiently? Do you have to press them in until they click or lock? Mine just slid in and are somewhat “loose” still.
thanks!
hank1930 - Jul 1, 2014
Madeline I have the same question about re inserting the ram but can’t find an answer
did you?
Hank
chnafou - Aug 30, 2014
Reply
I have followed the steps and the computer kept crashing when i started it with the RAM. Once i put the old pne back in, it started as smootly as before: i think these RAMs are not compatible with the A1181 model.
Maximillian Charles - Mar 10, 2016
Reply
I don’t know why some people are mentioning a torx. This is a regular phillips. Had one laying around from my old-style mac mini upgrade. It couldn’t be easier. It’s almost like the new style mac mini ram upgrade. So effortless.
Patrick Orum - Dec 5, 2020
Reply
Please note. The ram modules have to be pushed all the way in until they click in place. You have to push them quite hard to do this. If the ram modules just slide in until they stop then they won’t make contact.