Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Macbook 2009-2010 Unibody White Disassembly
- 5 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMacBook Unibody A1342
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing Back Plate
- Remove the six Phillips head screws with J00 bit.
Remove the six Phillips head screws with J00 bit.
1024
Step 2
Unplugging Battery from Logic Board
- Then Unplug the battery using a ESD Safe prying tool.
Then Unplug the battery using a ESD Safe prying tool.
Step 3
- Once battery is unplugged, remove two Philips head screws using J00 bit.
Once battery is unplugged, remove two Philips head screws using J00 bit.
Step 4
Removing Hard Drive Part 2
- After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board.
After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board.
Step 5
Removing The RAM
- Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first.
Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
11 other people completed this guide.
Author
with 6 other contributors
Gyoyo
Member since: 12/09/2016
407 Reputation
1 Guide authored
Badges:
5
+2 more badges