Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Enclosure Latch
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMac Pro 2013
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Enclosure
- Remove the enclosure by sliding the latch to the right and lifting the enclosure up.
Remove the enclosure by sliding the latch to the right and lifting the enclosure up.
1024
Step 2
Remove screws on retainer plate
- Using a T5 screwdriver, remove the six screws retaining the latch on the inside of the enclosure and lift out the retainer plate.
Using a T5 screwdriver, remove the six screws retaining the latch on the inside of the enclosure and lift out the retainer plate.
Step 3
Replace latch with modified version
- Remove the original latch, install the replacement latch with Kensington lock hole, and restore the retainer plate and six screws.
Remove the original latch, install the replacement latch with Kensington lock hole, and restore the retainer plate and six screws.
Step 4
Install Cable Lock
- Return the enclosure and slide the latch back to the left. Install cable lock into the exposed hole.
Return the enclosure and slide the latch back to the left. Install cable lock into the exposed hole.
This guide will help you secure your Mac Pro (2013) with any cable lock.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Kemper Barkhurst
Member since: 07/30/2015
149 Reputation
1 Guide authored
Badges:
3
