Featured
Featured Guide
Difficulty
Moderate
Steps
12
Time Required
15 minutes
Sections
3
- Bottom Cover
- 3 steps
- Antenna Plate
- 6 steps
- SSD
- 3 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackMac mini Late 2014
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- The bottom cover is clipped onto three screw posts.
- Pry near, but not right on the screw posts.
The bottom cover is clipped onto three screw posts.
Pry near, but not right on the screw posts.
1024
Step 2
- Use the plastic opening tool to pry the bottom cover up off of the Mac mini.
Use the plastic opening tool to pry the bottom cover up off of the Mac mini.
Step 3
- Lift and remove the bottom cover.
Lift and remove the bottom cover.
Step 4
Antenna Plate
- Remove the following TR6 screws from the antenna plate:
- Three 4.1 mm screws
- Three 1.9 mm screws
Remove the following TR6 screws from the antenna plate:
Three 4.1 mm screws
Three 1.9 mm screws
Step 5
- Do not completely remove the antenna plate; it is still connected to the Mac mini by an antenna cable.
- With the I/O ports facing you, flip the antenna plate to the right to allow access to the antenna cable connector.
Do not completely remove the antenna plate; it is still connected to the Mac mini by an antenna cable.
With the I/O ports facing you, flip the antenna plate to the right to allow access to the antenna cable connector.
Step 6
- Remove the single 3.4 mm T6 screw and washer from the antenna cable.
- Be careful not to lose the washer when removing the screw.
Remove the single 3.4 mm T6 screw and washer from the antenna cable.
Be careful not to lose the washer when removing the screw.
Step 7
- Use the point of a spudger to lift the antenna connector straight up off its socket on the airport card.
Use the point of a spudger to lift the antenna connector straight up off its socket on the airport card.
Step 8
- Carefully pull the antenna cable out from the gap between the power supply and case.
Carefully pull the antenna cable out from the gap between the power supply and case.
Step 9
- Remove the antenna plate from the Mac mini.
Remove the antenna plate from the Mac mini.
Step 10
SSD
- Remove the 5 mm T5 screw securing the SSD.
Remove the 5 mm T5 screw securing the SSD.
Step 11
- Lift the free end of the SSD up slightly and pull it out of its socket.
Lift the free end of the SSD up slightly and pull it out of its socket.
Step 12
- Carefully lift the SSD out of the case without scratching or touching the gold contacts.
Carefully lift the SSD out of the case without scratching or touching the gold contacts.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
96 other people completed this guide.
Author
with 5 other contributors
Sam Goldheart
Member since: 10/18/2012
455,549 Reputation
548 Guides authored
Badges:
48
+45 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
Juan Miguel Ramirez - Mar 6, 2016
Reply
If I have a Mac Mini without SSD, only with normal Hard Drive (NO Fusion). Can I install a new one SSD like on this tutorial?. Thanks!
Thomas Hall - May 16, 2017
Manuel Jesús Flores Jiménez - May 30, 2021
Si, yo lo hice y la diferencia es abismal. Necesitaras un adaptador y por supuesto el SSD. Yes, I did it and the difference is abysmal. You will need an adapter and of course the SSD.
shamino - Jan 12, 2022
Yes, but you need to add a cable to connect it. If you buy the SSD from OWC, they sell a kit which includes the cable and tools (for an extra $20-40, depending on what size/model SSD you get).
Cronan McNamara - Dec 6, 2016
Reply
I have the same question as Juan