Difficulty
Moderate
Steps
15
Time Required
Suggest a time??
Sections
1
- PM’s
- 15 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackM3T Kiosk
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Handle and Lock
- Make sure the door lock and handle are in good working order and not bent or loose
Make sure the door lock and handle are in good working order and not bent or loose
1024
Step 2
Opt cords
- Check the opt cords to make sure they aren’t broken or crimped
Check the opt cords to make sure they aren’t broken or crimped
Step 3
Opt Lights
- Make sure all the opt box lights that are supposed to be on are on.
Make sure all the opt box lights that are supposed to be on are on.
Step 4
Dispenser Belts
- Clean belts on top and on the back of the dispenser.
Clean belts on top and on the back of the dispenser.
Step 5
Test Dispense
- Test dispense the coin hoppers and the cash dispenser
Test dispense the coin hoppers and the cash dispenser
Step 6
Test Dispense (continued)
- (Continued)
(Continued)
Step 7
- Check the coin hoppers to make sure nothing is in it other than coins (like rubber bands or something that was dropped in it)
Check the coin hoppers to make sure nothing is in it other than coins (like rubber bands or something that was dropped in it)
Step 8
Fans
- Clean any dust off of the fans
Clean any dust off of the fans
Step 9
Printer
- Check the printer for paper and put in more if it’s needed
Check the printer for paper and put in more if it’s needed
Step 10
- Open and blow out the printer to remove any loose paper
Open and blow out the printer to remove any loose paper
Step 11
Clean Bill Validator
- Run a cleaning strip through the BV
Run a cleaning strip through the BV
Step 12
Bill Validator board
- Check for coins on the BV board.
Check for coins on the BV board.
Step 13
Bill Validator protector
- Put a board protector on if it’s missing and you have one available
Put a board protector on if it’s missing and you have one available
Step 14
Screen cleaning
- Clean the touch screen
Clean the touch screen
Step 15
Door lights
- Check to see if the door lights are on and working
Check to see if the door lights are on and working
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Timothy Morse
Member since: 12/30/2015
1,198 Reputation
6 Guides authored
Badges:
7
+4 more badges
Team
The Curo Group
Member of The Curo Group
Community
2 Members
7 Guides authored