Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Microphone
  • 8 steps

Flags

0

  • BackLorex LW2742

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Microphone
  • Remove the six 10mm Torx T10 screws on camera face.

Remove the six 10mm Torx T10 screws on camera face.

1024

Step 2

  • Remove the exterior lens cover.

Remove the exterior lens cover.

Step 3

  • Remove the LED foam ring with tweezers.
  • Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

Remove the LED foam ring with tweezers.

Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

Step 4

  • Remove the two 5mm Phillips #1 screws.
  • Remove the two 8mm Phillips #0 screws.
  • When reassembling, tighten the left and right 8mm screws first. Followed by the top and bottom 5mm screws.

Remove the two 5mm Phillips #1 screws.

Remove the two 8mm Phillips #0 screws.

When reassembling, tighten the left and right 8mm screws first. Followed by the top and bottom 5mm screws.

Step 5

  • Remove the two 5mm Phillips #1 screws.

Step 6

  • Use tweezers to disconnect the microphone wires from the internal components of camera.

Use tweezers to disconnect the microphone wires from the internal components of camera.

Step 7

  • Remove the 4mm Flathead #4 screw on the bottom of the camera.
  • Remove the weatherproof gasket around the microphone with tweezers.

Remove the 4mm Flathead #4 screw on the bottom of the camera.

Remove the weatherproof gasket around the microphone with tweezers.

Step 8

  • Remove the microphone.
  • Push the microphone from the inside out for easier removal.

Remove the microphone.

Push the microphone from the inside out for easier removal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Alex Kusmierz

Member since: 09/26/2016

601 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 16-1, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 16-1, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S16G1                     


                                            4 Members                     


                                            12 Guides authored