Lorex Lw2742 Lens Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Lens
7 steps

Flags

BackLorex LW2742
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Lens

Remove the six 10mm Torx T10 screws on the camera face.

Remove the six 10mm Torx T10 screws on the camera face.

1024

Step 2

Remove the exterior lens cover.

Remove the exterior lens cover.

Step 3

Remove the foam ring around the lens with tweezers.
Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

Remove the foam ring around the lens with tweezers.

Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

Step 4

Remove the two 5mm Phillips #1 screws.
Remove the two 8mm Phillips #0 screws.
When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

Remove the two 5mm Phillips #1 screws.

Remove the two 8mm Phillips #0 screws.

When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

Step 5

Remove the LED board with tweezers.
It is unnecessary to unplug the LED board from internal components for lens replacement.

Remove the LED board with tweezers.

It is unnecessary to unplug the LED board from internal components for lens replacement.

Step 6

Use the Phillips #000 to remove the three 3mm screws on the face of the camera lens

Use the Phillips #000 to remove the three 3mm screws on the face of the camera lens

Step 7

Remove the camera lens.
After replacing camera lens and before reassembly it is encouraged to clean new lens surface with a microfiber lens cleaning cloth

Remove the camera lens.

After replacing camera lens and before reassembly it is encouraged to clean new lens surface with a microfiber lens cleaning cloth

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Alex Kusmierz

Member since: 09/26/2016

601 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 16-1, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 16-1, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S16G1                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team