Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
2
- Open the rear cover of the Saeco Exprelia
- 2 steps
- Loosening the Saeco Exprelia rear frame
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSaeco Exprelia
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Open the rear cover of the Saeco Exprelia
- Remove all accessory parts like the water reservoir, the brewing assembly as well as the drip try.
- Remove all coffee beans from the bean container
- Always remove the power cord
- Remove the two T10 Torx screws from the bottom of the rear cover.
Remove all accessory parts like the water reservoir, the brewing assembly as well as the drip try.
Remove all coffee beans from the bean container
Always remove the power cord
Remove the two T10 Torx screws from the bottom of the rear cover.
1024
Step 2
- Pull the back cover approximately 1 cm (3/8inch) out from the bottom and push it in an upward direction.
Pull the back cover approximately 1 cm (3/8inch) out from the bottom and push it in an upward direction.
Step 3
Loosening the Saeco Exprelia rear frame
- Remove the five T10 Torx screws as marked
- the back frame consist of 3 pieces. Lift the top part out first, then each one of the side pieces
Remove the five T10 Torx screws as marked
the back frame consist of 3 pieces. Lift the top part out first, then each one of the side pieces
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
oldturkey03 is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
oldturkey03
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges