Difficulty

Difficult

Steps

6

Time Required

                          30 - 40 minutes

Sections

3

  • Front and Back Cover
  • 2 steps
  • USB Connection
  • 2 steps
  • USB Cable
  • 2 steps

Flags

0

  • BackLogitech Webcam Pro 9000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front and Back Cover
  • Remove the two 8 mm Phillips #0 screws on the back cover.
  • The motherboard connects the two covers together. DO NOT separate the two yet.
  • There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

Remove the two 8 mm Phillips #0 screws on the back cover.

The motherboard connects the two covers together. DO NOT separate the two yet.

There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

1024

Step 2

  • Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
  • DO NOT detach the wire connecting the motherboard to the front cover.

Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

DO NOT detach the wire connecting the motherboard to the front cover.

Step 3

              USB Connection
  • Use tweezers to grasp the white wire connector on the back of the motherboard.
  • Wiggle the connector back and forth to remove it from the socket.

Use tweezers to grasp the white wire connector on the back of the motherboard.

Wiggle the connector back and forth to remove it from the socket.

Step 4

  • Desolder the joint on the front of the motherboard to completely detach the USB cable.
  • Follow this link to learn how to properly solder and desolder your parts.

Desolder the joint on the front of the motherboard to completely detach the USB cable.

Follow this link to learn how to properly solder and desolder your parts.

Step 5

              USB Cable
  • Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring and release the USB cable.

Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring and release the USB cable.

Step 6

  • Feed the end of the disconnected USB cable through the back cover.

Feed the end of the disconnected USB cable through the back cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 7 other contributors 


                    Cory Davis

Member since: 04/14/2013

236 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 12-34, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 12-34, Amido Spring 2013 



                    CPSU-AMIDO-S13S12G34                     


                                            4 Members                     


                                            16 Guides authored

wohlgemuth1981 - Apr 8, 2016

Reply

Ich habe auch. ich braucht neu Kabel für C910 aber wo finden?

Shiva Ji Sachan - Feb 11, 2017

Reply

where i baught pro 9000 Cable