Logitech Webcam Pro 9000 Motherboard Replacement Repair Guide

Difficulty

Difficult

Steps

8

Time Required

                          30 - 40 minutes            

Sections

5

• Front and Back Cover
• 2 steps
• Snapshot button
• 1 step
• Microphone Connection
• 1 step
• USB Connection
• 2 steps
• Camera
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLogitech Webcam Pro 9000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front and Back Cover               

• Remove the two 8 mm Phillips #0 screws on the back cover.
• The motherboard connects the two covers together. DO NOT separate the two yet.
• There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

Remove the two 8 mm Phillips #0 screws on the back cover.

The motherboard connects the two covers together. DO NOT separate the two yet.

There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

1024

Step 2

• Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
• DO NOT detach the wire connecting the motherboard to the front cover.

Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

DO NOT detach the wire connecting the motherboard to the front cover.

Step 3

              Snapshot button               

• Grasp the white connector attaching the button chip wire to the motherboard.
• Grab between the tabs and the socket.
• Wiggle the connector back and forth to remove it from the connection box
• Do not worry if you detach the red and black wire connection on the power button.

Grasp the white connector attaching the button chip wire to the motherboard.

Grab between the tabs and the socket.

Wiggle the connector back and forth to remove it from the connection box

Do not worry if you detach the red and black wire connection on the power button.

Step 4

              Microphone Connection               

• Grasp the white wire connector between the tabs and the socket.
• Wiggle the connector back and forth to remove the front cover from the motherboard.

Grasp the white wire connector between the tabs and the socket.

Wiggle the connector back and forth to remove the front cover from the motherboard.

Step 5

              USB Connection               

• Use tweezers to grasp the white wire connector on the back of the motherboard.
• Wiggle the connector back and forth to remove it from the socket.

Use tweezers to grasp the white wire connector on the back of the motherboard.

Wiggle the connector back and forth to remove it from the socket.

Step 6

• Desolder the joint on the front of the motherboard to completely detach the USB cable.
• Follow this link to learn how to properly solder and desolder your parts.

Desolder the joint on the front of the motherboard to completely detach the USB cable.

Follow this link to learn how to properly solder and desolder your parts.

Step 7

              Camera               

• Remove the two 8mm Phillips#0 screws on the back of the motherboard.

Remove the two 8mm Phillips#0 screws on the back of the motherboard.

Step 8

• Remove the camera from the motherboard by desoldering the two connections as shown.
• Follow this link to learn how to properly solder and desolder your parts.

Remove the camera from the motherboard by desoldering the two connections as shown.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Cory Davis                     

Member since: 04/14/2013

236 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 12-34, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 12-34, Amido Spring 2013 



                    CPSU-AMIDO-S13S12G34                     


                                            4 Members                     


                                            16 Guides authored