Logitech Webcam Pro 9000 Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes            

Sections

3

• Front and Back Cover
• 2 steps
• Microphone Connection
• 1 step
• Microphone
• 2 steps

Flags

0

• BackLogitech Webcam Pro 9000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front and Back Cover               

• Remove the two 8 mm Phillips #0 screws on the back cover.
• The motherboard connects the two covers together. DO NOT separate the two yet.
• There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

Remove the two 8 mm Phillips #0 screws on the back cover.

The motherboard connects the two covers together. DO NOT separate the two yet.

There is a button that loosens as the Phillips screws are removed. Don’t be alarmed if it falls out.

1024

Step 2

• Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
• DO NOT detach the wire connecting the motherboard to the front cover.

Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

DO NOT detach the wire connecting the motherboard to the front cover.

Step 3

              Microphone Connection               

• Grasp the white wire connector between the tabs and the socket.
• Wiggle the connector back and forth to remove the front cover from the motherboard.

Grasp the white wire connector between the tabs and the socket.

Wiggle the connector back and forth to remove the front cover from the motherboard.

Step 4

              Microphone               

• Wedge the plastic opening tool into the crack between the plastic cover and microphone guard.
• Use the wedge to separate the two pieces.
• It might take more force than expected.

Wedge the plastic opening tool into the crack between the plastic cover and microphone guard.

Use the wedge to separate the two pieces.

It might take more force than expected.

Step 5

• Twist the rubber casing and remove it from the plastic cover.

Twist the rubber casing and remove it from the plastic cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 9 other contributors 

                    nieko                     

Member since: 04/18/2013

63 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 12-34, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 12-34, Amido Spring 2013 



                    CPSU-AMIDO-S13S12G34                     


                                            4 Members                     


                                            16 Guides authored