Logitech Ue Boombox Tweeter Speaker Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          50 minutes

Sections

Speaker Grille
13 steps
Tweeter Speaker
8 steps

Flags

BackLogitech UE Boombox
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker Grille

Use a metal spudger to pry open the power button cover.
Once the power button cover is slightly opened, use your fingers to remove the power button cover.

Use a metal spudger to pry open the power button cover.

Once the power button cover is slightly opened, use your fingers to remove the power button cover.

1024

Step 2

Press firmly on the end of the latch and pull the two-wire connector away from the base to separate.

Press firmly on the end of the latch and pull the two-wire connector away from the base to separate.

Step 3

Firmly press on the end of the latch and pull the four-wire connector away from the base to separate.

Firmly press on the end of the latch and pull the four-wire connector away from the base to separate.

Step 4

Lightly, pry up on each side of the black band connector lock using your fingertips.
Once unlocked, pull straight up on the connector to remove.

Lightly, pry up on each side of the black band connector lock using your fingertips.

Once unlocked, pull straight up on the connector to remove.

Step 5

Remove the five black 14mm Phillips #2 screws from the black plastic side panel.
Remove the one silver 16mm Phillips #2 screws from the black plastic side panel.
Remove the black plastic screw panel from the boombox.

Remove the five black 14mm Phillips #2 screws from the black plastic side panel.

Remove the one silver 16mm Phillips #2 screws from the black plastic side panel.

Remove the black plastic screw panel from the boombox.

Step 6

On the opposite side of the device, pry open the volume rocker with a metal spudger.
Remove the panel with your fingers once the volume rocker is slightly opened.

On the opposite side of the device, pry open the volume rocker with a metal spudger.

Remove the panel with your fingers once the volume rocker is slightly opened.

Step 7

Remove the five black 14mm Phillips #2 screws from the black plastic side panel.
Remove the one silver16 mm Phillips #2 screw from the black plastic side panel.
Once all screws are removed, take the screw panel out of the device to gain access to the back of the panel.

Remove the one silver16 mm Phillips #2 screw from the black plastic side panel.

Once all screws are removed, take the screw panel out of the device to gain access to the back of the panel.

Step 8

Firmly press on the end of the latch and pull the two-wire connector away from the base.

Firmly press on the end of the latch and pull the two-wire connector away from the base.

Step 9

Pull up on the aluminum boombox handle to remove.

Pull up on the aluminum boombox handle to remove.

Step 10

Use a metal spudger to pry the rubber base apart from the aluminum grille.

Use a metal spudger to pry the rubber base apart from the aluminum grille.

Step 11

Pull the rubber base away from the boombox.

Pull the rubber base away from the boombox.

Step 12

Remove the four black 7.5mm Phillips #2 screws on each side of the device.
There should be a total of eight screws removed in this step.

Remove the four black 7.5mm Phillips #2 screws on each side of the device.

There should be a total of eight screws removed in this step.

Step 13

Pull vertically on the speaker grille to remove it from the boombox.

Pull vertically on the speaker grille to remove it from the boombox.

Step 14

              Tweeter Speaker

Remove the fifteen 13.0 mm Phillips #2 screws from the side of the device containing two speakers.
Separate the two halves by gently pulling them apart.

Remove the fifteen 13.0 mm Phillips #2 screws from the side of the device containing two speakers.

Separate the two halves by gently pulling them apart.

Step 15

Locate the two tweeter speakers.
One tweeter speaker is adjacent to primary speaker and the other is below the motherboard.

Locate the two tweeter speakers.

One tweeter speaker is adjacent to primary speaker and the other is below the motherboard.

Step 16

Remove the two 7.0 mm screws Phillips #2.

Remove the two 7.0 mm screws Phillips #2.

Step 17

Using flat-head Tweezers lift tweeter speaker at an angle by the black connecting wire.
Desolder the black connecting wire using the Soldering Iron.
Soldering Iron will be hot and surrounding plastic can easily be damaged.
For soldering help, check out the How to Solder and Desolder Connections guide.

Using flat-head Tweezers lift tweeter speaker at an angle by the black connecting wire.

Desolder the black connecting wire using the Soldering Iron.

Soldering Iron will be hot and surrounding plastic can easily be damaged.

For soldering help, check out the How to Solder and Desolder Connections guide.

Step 18

Hold the tweeter speaker by the newly disconnected end using flat-head Tweezers.
Simultaneously unsolder the thin silver wire using the Soldering Iron while lifting tweeter speaker away from the device using flat-head Tweezers.

Hold the tweeter speaker by the newly disconnected end using flat-head Tweezers.

Simultaneously unsolder the thin silver wire using the Soldering Iron while lifting tweeter speaker away from the device using flat-head Tweezers.

Step 19

Remove the two 7.0 mm screws with a Phillips #2.

Remove the two 7.0 mm screws with a Phillips #2.

Step 20

Unsolder the black connecting wire using Soldering Iron.

Unsolder the black connecting wire using Soldering Iron.

Step 21

Hold tweeter speaker by newly disconnected end using flat-head tweezers.
Simultaneously unsolder the thin silver connecting wire using soldering iron while lifting tweeter speaker away from device using flat-head tweezers.

Hold tweeter speaker by newly disconnected end using flat-head tweezers.

Simultaneously unsolder the thin silver connecting wire using soldering iron while lifting tweeter speaker away from device using flat-head tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Wesley Kamau

Member since: 09/15/2016

224 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       CSU Fullerton, Team 1-1, Bruce Fall 2016                        

                                                  Member of CSU Fullerton, Team 1-1, Bruce Fall 2016 



                    CSUF-BRUCE-F16S1G1                     


                                            4 Members                     


                                            5 Guides authored

Ted Glasgow - Dec 29, 2019

Could you recommend anywhere to find the correct replacement tweeters & drivers?

Introduction#

What you need#

Team#

Introduction

What you need

Team