Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • D-ring
  • 2 steps
  • Bluetooth Adapter
  • 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackUE Boom

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              D-ring
  • Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.

Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.

1024

Step 2

  • Lift the handle on the D-ring and unscrew it.
  • Remove the D-ring.

Lift the handle on the D-ring and unscrew it.

Remove the D-ring.

Step 3

              Bluetooth Adapter
  • Any repairs made from this point forward will void your device’s warranty.
  • Holding the speaker upright, wedge the metal spudger in between the casing and the speaker. Gently pry open the tabs as they are easily broken.

Any repairs made from this point forward will void your device’s warranty.

Holding the speaker upright, wedge the metal spudger in between the casing and the speaker. Gently pry open the tabs as they are easily broken.

Step 4

  • Find the part of the casing that covers the volume controls. Wedge the metal spudger under this and pry open all of the tabs as in the previous step.
  • Repeat for the bottom of the speaker and pry the casing open with your fingers.

Find the part of the casing that covers the volume controls. Wedge the metal spudger under this and pry open all of the tabs as in the previous step.

Repeat for the bottom of the speaker and pry the casing open with your fingers.

Step 5

  • Using the Phillips J0 head screwdriver, unscrew the four silver 9 mm screws.
  • Do the same for the two black 7 mm screws.

Using the Phillips J0 head screwdriver, unscrew the four silver 9 mm screws.

Do the same for the two black 7 mm screws.

Step 6

  • This next step involves the use of a hot soldering iron. Remember to be careful during this step since it can be easy to burn yourself.
  • Using a soldering iron, de-solder the two ends of the switch plate.

This next step involves the use of a hot soldering iron. Remember to be careful during this step since it can be easy to burn yourself.

Using a soldering iron, de-solder the two ends of the switch plate.

Step 7

  • With the switch plate disconnected, remove it and your device should now look like this.

With the switch plate disconnected, remove it and your device should now look like this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 4 other contributors 


                    Jose Cruz Arinaga

Member since: 10/01/2015

927 Reputation

                                      3 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 4-1, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 4-1, Maness Fall 2015 



                    CPSU-MANESS-F15S4G1                     


                                            4 Members                     


                                            15 Guides authored