Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
1
- Logitech Performance MX Disassembly
- 9 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLogitech Performance MX Mouse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Remove the Mouse Feet
- Peel off the three thin, plastic mouse feet on the bottom of the mouse. Make sure to carefully remove the adhesive along with the pad.
- Use a thin flat object such as a flathead screwdriver to help remove if necessary.
Peel off the three thin, plastic mouse feet on the bottom of the mouse. Make sure to carefully remove the adhesive along with the pad.
Use a thin flat object such as a flathead screwdriver to help remove if necessary.
1024
Step 2
Remove the First Four Screws
- Using a screwdriver, unscrew the four screws that were under the mouse feet.
- Remove the battery from the mouse if not done already.
Using a screwdriver, unscrew the four screws that were under the mouse feet.
Remove the battery from the mouse if not done already.
Step 3
Separate the Top and Bottom
- Gently pull the top of the mouse off from the base, making sure the wires and components are in place.
- Carefully pull out the white enclosure from its port to safely take the top apart from the bottom.
Gently pull the top of the mouse off from the base, making sure the wires and components are in place.
Carefully pull out the white enclosure from its port to safely take the top apart from the bottom.
Step 4
Remove the Scroll Wheel Base
- Pull out the plastic pin in-between the scroll wheel and the battery enclosure and pull up on the scroll wheel base to remove.
Pull out the plastic pin in-between the scroll wheel and the battery enclosure and pull up on the scroll wheel base to remove.
Step 5
Unscrew for the Battery Capsule
- Remove the 2 small springs underneath the scroll wheel base.
- Unscrew the four screws holding the battery capsule onto the PCB.
Remove the 2 small springs underneath the scroll wheel base.
Unscrew the four screws holding the battery capsule onto the PCB.
Step 6
Unplug the Ribbon Cable
- Unplug the ribbon cable from the circuit board. Be careful to not remove the cable’s locking mechanism.
Unplug the ribbon cable from the circuit board. Be careful to not remove the cable’s locking mechanism.
Step 7
Remove Scroll Wheel Support
- Unscrew the four screws to take out the black scroll wheel support in the center and the two black pads that lie on both sides of the support.
Unscrew the four screws to take out the black scroll wheel support in the center and the two black pads that lie on both sides of the support.
Step 8
Pull Up Circuit Board
- Pull the circuit board up to find the on and off switch. Take out the clear plastic bit that held the springs.
Pull the circuit board up to find the on and off switch. Take out the clear plastic bit that held the springs.
Step 9
Disassembly Finished!
- All parts should be visible to repair or for replacement.
All parts should be visible to repair or for replacement.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Harika Vuppalapati
Member since: 11/23/2021
199 Reputation
1 Guide authored
Badges:
3