Difficulty

Easy

Steps

13

Time Required

                          10 minutes

Sections

2

  • Logitech Ergo Mx Disassembly
  • 10 steps
  • Logitech Mx Ergo Scroll Wheel (fixing slippage)
  • 3 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLogitech MX Ergo

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Logitech Ergo Mx Disassembly
  • Remove six T6 screws from the bottom

Remove six T6 screws from the bottom

1024

Step 2

  • Slide a prying tool under the rightmost button and follow the seam back till the top half unclips

Slide a prying tool under the rightmost button and follow the seam back till the top half unclips

Step 3

  • Carefully lift the top shell.
  • Do not remove the flap from the connector.
  • Release the flex ribbon from its socket.

Carefully lift the top shell.

Do not remove the flap from the connector.

Release the flex ribbon from its socket.

Step 4

  • Lever the scrollwheel sub-assembly free

Lever the scrollwheel sub-assembly free

Step 5

  • Unplug the battery from the mainboard, carefully lifting the plug marked blue
  • Unscrew the three screws holding the battery submodule

Unplug the battery from the mainboard, carefully lifting the plug marked blue

Unscrew the three screws holding the battery submodule

Step 6

  • Unscrew the bottom left screw holding down the fwd/rev buttons, lifting the assembly to the side
  • Unplug the flex ribbon indicated in blue, coming from the power board below. Remove the six screws holding the main motherboard (one indicated orange here, just out of shot).

Unscrew the bottom left screw holding down the fwd/rev buttons, lifting the assembly to the side

Unplug the flex ribbon indicated in blue, coming from the power board below. Remove the six screws holding the main motherboard (one indicated orange here, just out of shot).

Step 7

  • Unscrew the three screws holding the power board i place. Take care not to loose the power switch below as you take the last bits apart.
  • These three screws are a bit shorter than the rest, so keep them separate

Unscrew the three screws holding the power board i place. Take care not to loose the power switch below as you take the last bits apart.

These three screws are a bit shorter than the rest, so keep them separate

Step 8

  • There you go, all disassembled. Now remove spilled coffee.

There you go, all disassembled. Now remove spilled coffee.

Step 9

              Disassembly of top half
  • The right click lever comes out after the bracket covering the ribbon cable
  • The Right click lever comes out through the front/top of the mouse
  • Then the circuit boards can be removed

The right click lever comes out after the bracket covering the ribbon cable

The Right click lever comes out through the front/top of the mouse

Then the circuit boards can be removed

Step 10

  • Under the circuit boards there is three piece that need to come out next
  • The first has one screw and two clear pieces that transmit the light from the circuit board to the outside of the mouse and hole to allow another to pass through it
  • Then the computer selector switch lever can come out the front/top of the mouse
  • After that the connecting light indicator transmitter will fall out and the left click lever can be removed

Under the circuit boards there is three piece that need to come out next

The first has one screw and two clear pieces that transmit the light from the circuit board to the outside of the mouse and hole to allow another to pass through it

Then the computer selector switch lever can come out the front/top of the mouse

After that the connecting light indicator transmitter will fall out and the left click lever can be removed

Step 11

              Remove dust/filth
  • With the cover open, look at the scroll wheel on the side that has a hollow central area and roll the wheel. You should look for any dirt/filth that may have accumulated on this inner side of the wheel in the form of a little ball that interferes with the sensors (see image on next step).

With the cover open, look at the scroll wheel on the side that has a hollow central area and roll the wheel. You should look for any dirt/filth that may have accumulated on this inner side of the wheel in the form of a little ball that interferes with the sensors (see image on next step).

Step 12

  • Carefully remove it using tweezers, so you don’t bump the assembly out of alignment.

Carefully remove it using tweezers, so you don’t bump the assembly out of alignment.

Step 13

              Reassemble
  • That’s it! Now just reassemble your MX-Ergo: Logitech Ergo Mx Disassembly

That’s it! Now just reassemble your MX-Ergo: Logitech Ergo Mx Disassembly

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Eiti

Member since: 10/10/2016

123 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges