Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

4

  • Battery
  • 2 steps
  • Top Cover
  • 2 steps
  • Motherboard
  • 1 step
  • Cover Release Button
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLogitech M215

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the battery cover
  • The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover.
  • There is a button to pop off the cover. It is located on the bottom of the mouse. you may need to press hard on this button to pop the cover.
  • If the button does not work, you will need to pry off the cover. You can use your fingernails or a prying tool in order to do this, as seen in the third image.

The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover.

There is a button to pop off the cover. It is located on the bottom of the mouse. you may need to press hard on this button to pop the cover.

If the button does not work, you will need to pry off the cover. You can use your fingernails or a prying tool in order to do this, as seen in the third image.

1024

Step 2

              Remove old battery
  • Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.

Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.

Step 3

              Top Cover
  • The pads on the underside of the mouse hide the screws. Remove these first. You may need to use your fingernails or a prying tool.
  • There will be two 0.5mm phillips head screws. Both will be underneath the bottom two pads.

The pads on the underside of the mouse hide the screws. Remove these first. You may need to use your fingernails or a prying tool.

There will be two 0.5mm phillips head screws. Both will be underneath the bottom two pads.

Step 4

  • Pry the top cover off. You may need to use a pry tool to help.

Pry the top cover off. You may need to use a pry tool to help.

Step 5

              Motherboard
  • Unscrew the 0.25mm phillips head screw to release the circuit board.

Unscrew the 0.25mm phillips head screw to release the circuit board.

Step 6

              Cover Release Button
  • Unscrew the 0.25mm phillips head screw holding the button in place. The cover release button can then be removed.

Unscrew the 0.25mm phillips head screw holding the button in place. The cover release button can then be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Hannah Pate

Member since: 01/30/2015

1,690 Reputation

                                      7 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       USF Tampa, Team 1-1, Watkins Winter 2015                        

                                                  Member of USF Tampa, Team 1-1, Watkins Winter 2015 



                    USFT-WATKINS-W15S1G1                     


                                            4 Members                     


                                            28 Guides authored