Logitech K360 Cleaning And Key Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 - 30 minutes            

Sections

1

• Cleaning and Key
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackLogitech Wireless K360

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cleaning and Key               

• Flip the keyboard face down, so that the keys are not visible. On this side, a detachable battery compartment cover will be visible. Once identified, ensure that the batteries are removed from the keyboard to ensure safety for yourself.
• The keyboard should be disconnected, powered off, or have batteries removed before any technical work is done on the device!

Flip the keyboard face down, so that the keys are not visible. On this side, a detachable battery compartment cover will be visible. Once identified, ensure that the batteries are removed from the keyboard to ensure safety for yourself.

The keyboard should be disconnected, powered off, or have batteries removed before any technical work is done on the device!

1024

Step 2

• Locate the key that needs replacing.
• Multiple thin tools can be used to pick out the key from the keyboard. In this instance, a 2mm precision flathead screwdriver was used.
• Insert the flathead screwdriver at an angle underneath the key and begin to pry the key up with the desired tool. Pry from different angles/corners till the key pops off. Doing this will expose the underside of the keyboard.

Locate the key that needs replacing.

Multiple thin tools can be used to pick out the key from the keyboard. In this instance, a 2mm precision flathead screwdriver was used.

Insert the flathead screwdriver at an angle underneath the key and begin to pry the key up with the desired tool. Pry from different angles/corners till the key pops off. Doing this will expose the underside of the keyboard.

Step 3

• To properly clean the keys, soapy water will be made by using one cup of water, one tablespoon of baking soda, and one tablespoon of soap. Add together in a desired bowl and stir until uniform.
• Once the soapy water is homogenous, add the individual keys and let them sit in the mixture for 30 minutes.

To properly clean the keys, soapy water will be made by using one cup of water, one tablespoon of baking soda, and one tablespoon of soap. Add together in a desired bowl and stir until uniform.

Once the soapy water is homogenous, add the individual keys and let them sit in the mixture for 30 minutes.

Step 4

• While waiting for the key to soak for the specified time, use a compressed air can to remove any dust particles under the keys. Do this by aiming the can’s nozzle into any area that has dust build-up and begin to spray.

While waiting for the key to soak for the specified time, use a compressed air can to remove any dust particles under the keys. Do this by aiming the can’s nozzle into any area that has dust build-up and begin to spray.

Step 5

• Use a small bristle brush to remove any dust present on the keyboard, especially in areas that are not visible when keys are connected. In this step, a make-up brush is used.

Use a small bristle brush to remove any dust present on the keyboard, especially in areas that are not visible when keys are connected. In this step, a make-up brush is used.

Step 6

• Once the 30-minute timer is up, remove the keys from the soapy water and use a rag or paper to dry them. Dry by padding down keys until there is no visible or physical dampness on the keys.

Once the 30-minute timer is up, remove the keys from the soapy water and use a rag or paper to dry them. Dry by padding down keys until there is no visible or physical dampness on the keys.

Step 7

• Place keys back in the correct spot and find a google image that shows the correct order of the keys to ensure that the key placements are correct.

Place keys back in the correct spot and find a google image that shows the correct order of the keys to ensure that the key placements are correct.

Step 8

• Reconnect the batteries in the battery compartment located on the backside of the keyboard, in the correct positive to negative position, and turn on the keyboard.

Reconnect the batteries in the battery compartment located on the backside of the keyboard, in the correct positive to negative position, and turn on the keyboard.

Step 9

• Turn on the computer and attempt to use the keyboard to make sure the keyboard is fully functional.

Turn on the computer and attempt to use the keyboard to make sure the keyboard is fully functional.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Stefano Blasoni                     

Member since: 11/17/2022

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges