Difficulty
Difficult
Steps
5
Time Required
10 - 20 minutes
Sections
1
- Battery Contact
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackLogitech Harmony Smart Control
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Soldering Guide
What you need
Step 1
Battery Contact
- Use both thumbs to slide the grooved cover off of the remote
- Once the cover is off, remove the battery.
Use both thumbs to slide the grooved cover off of the remote
Once the cover is off, remove the battery.
1024
Step 2
- Locate both of the 4mm Phillips screws on the remote. Using the PH00 bit, remove the screws.
Locate both of the 4mm Phillips screws on the remote. Using the PH00 bit, remove the screws.
Step 3
- Use a flat screwdriver or a prying tool to split the remote and separate the two pieces. Start from the bottom.
Use a flat screwdriver or a prying tool to split the remote and separate the two pieces. Start from the bottom.
Step 4
- Using the metal piece from the housing, pry the circuit board upwards. Do not disconnect it from the board.
- Slide the circuit board out from the housing .
Using the metal piece from the housing, pry the circuit board upwards. Do not disconnect it from the board.
Slide the circuit board out from the housing .
Step 5
- Locate the battery contacts on the circuit board.
- Using a soldering iron, remove the old solder and the battery contacts. Install new battery contacts and solder them.
Locate the battery contacts on the circuit board.
Using a soldering iron, remove the old solder and the battery contacts. Install new battery contacts and solder them.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Josh Hendricks
Member since: 09/17/2015
464 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team 3-2, Harley Fall 2015
Member of IUPUI, Team 3-2, Harley Fall 2015
IUPUI-HARLEY-F15S3G2
4 Members
5 Guides authored