Difficulty
Very easy
Steps
4
Time Required
5 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackLogitech Harmony 950
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure the remote control is powered off before starting.
- Use the Opening Tool to open the port cover at the bottom of the remote control.
- Bend the cover back to gain easy access to the screws.
Make sure the remote control is powered off before starting.
Use the Opening Tool to open the port cover at the bottom of the remote control.
Bend the cover back to gain easy access to the screws.
1024
Step 2
- Use the Phillips #0 Screwdriver to remove the (2) two 6mm screws.
- Pull the bottom cover off of the remote control.
Use the Phillips #0 Screwdriver to remove the (2) two 6mm screws.
Pull the bottom cover off of the remote control.
Step 3
- Use the Phillips #1 Screwdriver to remove the (2) two 6mm screws.
- There should be a gap on each side to fit the Opening Tool. Use the Opening Tool to open the back cover (Soft Touch cover) using the gap.
Use the Phillips #1 Screwdriver to remove the (2) two 6mm screws.
There should be a gap on each side to fit the Opening Tool. Use the Opening Tool to open the back cover (Soft Touch cover) using the gap.
Step 4
- Use the Opening Tool to lift the battery out of the case.
- Gently pull the cable out of the socket to unplug the battery.
- Be careful not to damage any part of the remote when pulling the cable out.
Use the Opening Tool to lift the battery out of the case.
Gently pull the cable out of the socket to unplug the battery.
Be careful not to damage any part of the remote when pulling the cable out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 3 other contributors
Blake Sanborn
Member since: 09/26/2017
510 Reputation
3 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team S2-G2, Passmore Fall 2017
Member of USF Tampa, Team S2-G2, Passmore Fall 2017
USFT-PASSMORE-F17S2G2
4 Members
4 Guides authored
Rene A - Feb 5, 2018
Reply
And where to buy these batteries?