Difficulty

Easy

Steps

10

Time Required

                          4 minutes

Sections

2

  • Case
  • 7 steps
  • Battery Terminal
  • 3 steps

Flags

0

  • BackLogitech Harmony 650

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Remove the battery cover by applying pressure to the indented area and pushing the cover toward the rear of the device.

Remove the battery cover by applying pressure to the indented area and pushing the cover toward the rear of the device.

1024

Step 2

  • Remove the batteries using the silver pull tab.

Remove the batteries using the silver pull tab.

Step 3

  • Using a J000 Philips head screwdriver remove the four 5mm screws around the rim of the battery chamber.

Using a J000 Philips head screwdriver remove the four 5mm screws around the rim of the battery chamber.

Step 4

  • Remove the small plastic cover beneath the plastic LED housing by using a 3.0 flathead screwdriver and a spudger to pry it off. It is glued to the case. If you are having trouble removing it try applying some heat to loosen the glue.

Remove the small plastic cover beneath the plastic LED housing by using a 3.0 flathead screwdriver and a spudger to pry it off. It is glued to the case. If you are having trouble removing it try applying some heat to loosen the glue.

Step 5

  • Remove the two 5mm screws located underneath the cover using a J000 Philips screwdriver bit.

Remove the two 5mm screws located underneath the cover using a J000 Philips screwdriver bit.

Step 6

  • Using a plastic opening tool, pry the case off starting from the top of the device (nearest the transmitter). There are 3 tabs along the side of the case and one at the back.
  • The top led protector plastic cover will also be freed once back is removed.

Using a plastic opening tool, pry the case off starting from the top of the device (nearest the transmitter). There are 3 tabs along the side of the case and one at the back.

The top led protector plastic cover will also be freed once back is removed.

Step 7

  • Remove the rear cover.

Remove the rear cover.

Step 8

              Battery Terminal
  • Using the small end of a spudger, pry out the terminal from the interior of the case.

Using the small end of a spudger, pry out the terminal from the interior of the case.

Step 9

  • Start from one side and work your way to the other side using the spudger.

Start from one side and work your way to the other side using the spudger.

Step 10

  • Remove the terminal.

Remove the terminal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Connor Gallagher

Member since: 01/11/2016

998 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Eastern Washington University, Team 1-2, Rowley Winter 2016                        

                                                  Member of Eastern Washington University, Team 1-2, Rowley Winter 2016 



                    EWU-ROWLEY-W16S1G2                     


                                            4 Members                     


                                            5 Guides authored