Difficulty

Easy

Steps

4

Time Required

                          10 - 20 minutes

Sections

1

  • Logitech G710+ Disassembly
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLogitech G710+

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Body
  • Remove 14 Phillips screws on the bottom of the kayboard.
  • Use a plastic tool to release the clips holding the case together.
  • There are two hidden clips above the left and right arrow keys.
  • Gently pry the two halves of the case apart.
  • Don’t worry if any of the clips break, the screws will still hold the keyboard together once reassembled.

Remove 14 Phillips screws on the bottom of the kayboard.

Use a plastic tool to release the clips holding the case together.

There are two hidden clips above the left and right arrow keys.

Gently pry the two halves of the case apart.

Don’t worry if any of the clips break, the screws will still hold the keyboard together once reassembled.

1024

Step 2

              Mother board
  • Unscrew the one screw holding on the ground and pull out the cables.
  • A good way of getting the cables out is by putting a screwdriver right there and twisting.
  • Unscrew this screw

Unscrew the one screw holding on the ground and pull out the cables.

A good way of getting the cables out is by putting a screwdriver right there and twisting.

Unscrew this screw

Step 3

              Scroll Wheel
  • The light thing comes out with a wiggle.
  • The scroll wheel on the other is harder because you have to melt or brake the supports off.
  • Then you have to get the wheel out which comes out with a very gentle wiggle.

The light thing comes out with a wiggle.

The scroll wheel on the other is harder because you have to melt or brake the supports off.

Then you have to get the wheel out which comes out with a very gentle wiggle.

Step 4

              Pads
  • You can then take off the little pads

You can then take off the little pads

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 4 other contributors 


                    Jackson Poer

Member since: 04/08/2017

671 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Captain Planet - Dec 4, 2019

Reply

Okay but then how do remove the Silver screw at the top of the keyboard, next to the grounded screw?

wildcat_15au - Mar 27, 2020

Reply

step 2, 3rd picture “undo this screw” did not exist on my G710+. rather it had 3 screws one on the botom with a tab and one above the 2 key and one upper left of the insert key.

as for captains question, since i’m replying you get it after removing the motherboard from the back.