Difficulty

Moderate

Steps

6

Time Required

                          30 minutes

Sections

2

  • Top Case Replacement
  • 3 steps
  • Logitech G700s Left and Right Mouse Button Disassembly
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLogitech G700s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Case Replacement
  • Remove the batteries from the mouse.
  • Use a plastic opening tool to peel up the four mouse feet.

Remove the batteries from the mouse.

Use a plastic opening tool to peel up the four mouse feet.

1024

Step 2

  • Remove the five 5.5mm Phillips #00 screws found underneath the mouse feet.

Remove the five 5.5mm Phillips #00 screws found underneath the mouse feet.

Step 3

  • Pull the top of the mouse off of the bottom half.
  • There’s a wire connecting the two halves.
  • Unplug the programmable buttons from the motherboard.
  • The white pin housing on the motherboard may come off while unplugging. In that case, use tool to pry between at location indicated to separate them and insert the housing back onto the motherboard.

Pull the top of the mouse off of the bottom half.

There’s a wire connecting the two halves.

Unplug the programmable buttons from the motherboard.

The white pin housing on the motherboard may come off while unplugging. In that case, use tool to pry between at location indicated to separate them and insert the housing back onto the motherboard.

Step 4

              Logitech G700s Left and Right Mouse Button Disassembly
  • Pop the right button piston off the ledge thingy
  • Then pop the left button piston off
  • It can take a bit of force to pop them off.

Pop the right button piston off the ledge thingy

Then pop the left button piston off

It can take a bit of force to pop them off.

Step 5

  • Remove the three Philips head screws holding the left and right button clicker in place

Remove the three Philips head screws holding the left and right button clicker in place

Step 6

  • Remove the left and right button & G13 & scroll wheel lock assembly from the top shell assembly.
  • You can push on indicated locations to gain leverage

Remove the left and right button & G13 & scroll wheel lock assembly from the top shell assembly.

You can push on indicated locations to gain leverage

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    dennis97519

Member since: 10/18/2011

444 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges