Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

1

  • Side Motherboard
  • 8 steps

Flags

0

  • BackLogitech G602

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Side Motherboard
  • Use a blue spudger to pry all 4 mice feet from the bottom of the mouse.

Use a blue spudger to pry all 4 mice feet from the bottom of the mouse.

1024

Step 2

  • Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm) from underneath the mice feet.

Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm) from underneath the mice feet.

Step 3

  • Use the blue spudger to prop open the bottom battery port.
  • Remove the AA batteries.

Use the blue spudger to prop open the bottom battery port.

Remove the AA batteries.

Step 4

  • Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.

Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.

Step 5

  • Use tweezers to grip and pull the white ribbon cable from the motherboard.

Use tweezers to grip and pull the white ribbon cable from the motherboard.

Step 6

  • Use a Phillips #00 screwdriver to remove both screws (3x5mm ) from above the side motherboard.

Use a Phillips #00 screwdriver to remove both screws (3x5mm ) from above the side motherboard.

Step 7

  • Use a Phillips #00 screwdriver and unscrew both screws from the side motherboard.
  • We used a set of pliers and a Phillips #00 screw bit because the screwdriver couldn’t fit into the side of the device.

Use a Phillips #00 screwdriver and unscrew both screws from the side motherboard.

We used a set of pliers and a Phillips #00 screw bit because the screwdriver couldn’t fit into the side of the device.

Step 8

  • Use a black spudger and your fingers to loosen and remove the side motherboard.

Use a black spudger and your fingers to loosen and remove the side motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Matthew Ross

Member since: 01/17/2018

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Eastern Washington University, Team S1-G1, Ramos Winter 2018                        

                                                  Member of Eastern Washington University, Team S1-G1, Ramos Winter 2018 



                    EWU-RAMOS-W18S1G1                     


                                            4 Members                     


                                            15 Guides authored