Logitech G29 Steering Wheel Motherboard Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          15 minutes            

Sections

1

• Steering Wheel Motherboard
• 7 steps

Flags

0

• BackLogitech G29 Driving Force

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This repair may be necessary if the device will not navigate through the menu or functions in the game can not be completed. Always have a clean workspace and make sure the device is disconnected from the power supply and devices.

What you need

Step 1

              Steering Wheel Motherboard               

• Remove the six 32mm long 4mm Allen screws from the faceplate of the steering wheel

Remove the six 32mm long 4mm Allen screws from the faceplate of the steering wheel

1024

Step 2

• Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel. Rotate the steering wheel 60 degrees per screw until all 6 screws are removed.
• Gently lift the steering wheel off the steering column

Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel. Rotate the steering wheel 60 degrees per screw until all 6 screws are removed.

Gently lift the steering wheel off the steering column

Step 3

• Gently unplug the wiring harness from the circuit board.

Gently unplug the wiring harness from the circuit board.

Step 4

• Remove the 6 10mm long #00 Philips head screws that hold the circuit board to the steering wheel.

Remove the 6 10mm long #00 Philips head screws that hold the circuit board to the steering wheel.

Step 5

• Remove the two 8mm long #00 Philips head screws holding the smaller circuit board onto the steering wheel.

Remove the two 8mm long #00 Philips head screws holding the smaller circuit board onto the steering wheel.

Step 6

• Gently lift the circuit board off the steering wheel. replace the circuit board with the new part.

Gently lift the circuit board off the steering wheel. replace the circuit board with the new part.

Step 7

• The replacement part should match this image. All buttons on the steering wheel are included on this circuit board.

The replacement part should match this image. All buttons on the steering wheel are included on this circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Cray McCall                     

Member since: 09/16/2022

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Western Carolina University, Team 1-5, Virtue Fall 2022                        

                                                  Member of Western Carolina University, Team 1-5, Virtue Fall 2022 



                    WCU-VIRTUE-F22S1G5                     


                                            4 Members                     


                                            5 Guides authored