Logitech G Pro Gaming Mouse Teardown Solve Double Clicking Issue Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes - 1 hour

Sections

Logitech G Pro Gaming Mouse Teardown/Solve double clicking issue
6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackLogitech G Pro Gaming Mouse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Taking off the main screws

First you have take off the main screws. This are three Philips #0 . Two located in the front, one below the Logitech sticker as you can see in the image.
TIP: If you want to preserve the sticker you should use a thin blade to take it off. Personally I like to use Olfa black blade due to their great sharpness and stiffness.

First you have take off the main screws. This are three Philips #0 . Two located in the front, one below the Logitech sticker as you can see in the image.

TIP: If you want to preserve the sticker you should use a thin blade to take it off. Personally I like to use Olfa black blade due to their great sharpness and stiffness.

1024

Step 2

              Taking a look at the inside

After taking off the three main screws you can take out easily the upper cap and access to the components of the mouse. All the screws are of the same kind but the two that appear in the photo are different. The have a bigger head to be able to capture the green PCB

After taking off the three main screws you can take out easily the upper cap and access to the components of the mouse. All the screws are of the same kind but the two that appear in the photo are different. The have a bigger head to be able to capture the green PCB

Step 3

              Taking out everything

Once all the inner screws are removed is better to take out the entire PCB and unplug the main cord to handle the board easily.
Our main goal is to repair the double clicking issue that presents often after a couple of years or even months of hard usage of the mouse

Once all the inner screws are removed is better to take out the entire PCB and unplug the main cord to handle the board easily.

Our main goal is to repair the double clicking issue that presents often after a couple of years or even months of hard usage of the mouse

Step 4

              Working on the click button

Now we focus on the malfunctioning button. Either the right or left click although the method works properly for any button which uses the same Omron switches
These have a plastic cap which covers the metal mechanical mechanism. We have to take it of and leave the bronze metal piece uncovered. I used a thin blade to perform the latter.
Be careful not to brake the plastic cap while doing this step and be aware of the small white piece which is vital to complete the clicking process.

Now we focus on the malfunctioning button. Either the right or left click although the method works properly for any button which uses the same Omron switches

These have a plastic cap which covers the metal mechanical mechanism. We have to take it of and leave the bronze metal piece uncovered. I used a thin blade to perform the latter.

Be careful not to brake the plastic cap while doing this step and be aware of the small white piece which is vital to complete the clicking process.

Step 5

              Fixing the plate

The issue is often caused due to having an overflattened metal plate. Push the small bending in the plate until you leave it as the one in the image.
Now we have to install back the metal plate. A small twissers become handy for this although you can do it without ones

The issue is often caused due to having an overflattened metal plate. Push the small bending in the plate until you leave it as the one in the image.

Now we have to install back the metal plate. A small twissers become handy for this although you can do it without ones

Step 6

              Putting all back together.

Finally take the button back into shape and assemble in back covering the bronze plate. Now the button should work properly. The feelng of it may not feel the same as when the button was unopened but at least it will work now.
After performing this you can put back all the components just as you did to take the mouse apart.

Finally take the button back into shape and assemble in back covering the bronze plate. Now the button should work properly. The feelng of it may not feel the same as when the button was unopened but at least it will work now.

After performing this you can put back all the components just as you did to take the mouse apart.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Fernando L. R.

Member since: 09/02/2020

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Member-Contributed Guide#

What you need#

Member-Contributed Guide

What you need