Difficulty

Moderate

Steps

3

Time Required

                          10 - 20 minutes

Sections

1

  • Joystick
  • 3 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackLogitech Dual Action

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Taking out the screws
  • To get into the controller, you will need to unscrew the 7 screws on the back.
  • You will have to remove the bottom oval sticker to reveal the screw marked with orange.

To get into the controller, you will need to unscrew the 7 screws on the back.

You will have to remove the bottom oval sticker to reveal the screw marked with orange.

1024

Step 2

              Opening the controller
  • With the screws removed, turn the controller upside down and separate the front end from the back end.
  • It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.
  • There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.

With the screws removed, turn the controller upside down and separate the front end from the back end.

It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.

There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.

Step 3

              Replacing the joystick
  • With the case off, the joysticks can be removed by pulling them upward.
  • To put the replacement joystick on, align the hole at the bottom of the joystick with the rectangular peg and gently push down.
  • Make sure that the cut-out side of the joystick is towards the outsides of the device.

With the case off, the joysticks can be removed by pulling them upward.

To put the replacement joystick on, align the hole at the bottom of the joystick with the rectangular peg and gently push down.

Make sure that the cut-out side of the joystick is towards the outsides of the device.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 3 other contributors 


                    Brian Neuman

Member since: 01/20/2015

767 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 7-4, Remmell Winter 2015                        

                                                  Member of USF Tampa, Team 7-4, Remmell Winter 2015 



                    USFT-REMMELL-W15S7G4                     


                                            4 Members                     


                                            3 Guides authored

shivam sah - Sep 17, 2017

Reply

Can the Analogue Stick be replaced with the One of XBOX 360 or PS3 Controller

Atsuku - Mar 28, 2019

Reply

will the buttons still work if you put it all back?

christopherguyruiz - Jul 29, 2022

Reply

If you need sticks look for small holed ones like these.

https://www.aliexpress.com/item/32568030…

https://www.aliexpress.com/item/32568012…

onn jil - Nov 17, 2022

Reply

When you press the buttons, they don’t work, but when you press hard, they only work, and they don’t work just by pressing normally?