Difficulty
Moderate
Steps
10
Time Required
1 hour
Sections
1
- Battery
- 10 steps
Flags
5
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLogitech Cube Mouse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Logitech Cube Mouse Battery Replacement/Removal
Logitech Cube Mouse Battery Replacement/Removal
1024
Step 2
- Peel the touch pad up from the support plate to make a 1 CM space.
Peel the touch pad up from the support plate to make a 1 CM space.
Step 3
- Use a small thin object to pry outwards between the black plastic and white plastic to release two clips under the support plate.
Use a small thin object to pry outwards between the black plastic and white plastic to release two clips under the support plate.
Step 4
- After slowly releasing the two clips hinge up the touch panel 1 inch.
After slowly releasing the two clips hinge up the touch panel 1 inch.
Step 5
- Slide the touch panel towards the back of the mouse 1CM.
Slide the touch panel towards the back of the mouse 1CM.
Step 6
- Lift the touch panel and support plate.
Lift the touch panel and support plate.
Step 7
- Lift and rotate touch panel and support plate. Disconnect the touch panel connector, the other cable helps to sense touch.
Lift and rotate touch panel and support plate. Disconnect the touch panel connector, the other cable helps to sense touch.
Step 8
- Remove battery, battery plug from board connection, metal plate, and two screws. A notch in the plate matches a groove on the inside, removal at a angle is required.
Remove battery, battery plug from board connection, metal plate, and two screws. A notch in the plate matches a groove on the inside, removal at a angle is required.
Step 9
- Find another battery. Original is 533-000071 3.7v 240mAh 0.63IN x 1.18IN x 0.21IN or 16.002MM X 29.972MM X 5.334MM. There is some room for different lengths and widths, but height looks to be about 5.334MM. Due to my battery’s width I had to bend a tab flat on the plate and only use 1 screw.
Find another battery. Original is 533-000071 3.7v 240mAh 0.63IN x 1.18IN x 0.21IN or 16.002MM X 29.972MM X 5.334MM. There is some room for different lengths and widths, but height looks to be about 5.334MM. Due to my battery’s width I had to bend a tab flat on the plate and only use 1 screw.
Step 10
- Press the touch pad and support plate together to undo slightly peeling them apart. Attach the battery to the plate, Install plate/ battery in mouse. Plug in battery and touch panel cables, rotate touch panel and support plate back into place. Place the front tab in its slot and press the back down to attach the clips to the bar.
Press the touch pad and support plate together to undo slightly peeling them apart. Attach the battery to the plate, Install plate/ battery in mouse. Plug in battery and touch panel cables, rotate touch panel and support plate back into place. Place the front tab in its slot and press the back down to attach the clips to the bar.
Unless the chosen battery is different, reassembly is in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Brandon
Member since: 12/17/2021
181 Reputation
1 Guide authored
Badges:
2