Difficulty

Moderate

Steps

8

Time Required

                          20 minutes

Sections

1

  • Speaker
  • 8 steps

Flags

0

  • BackLogitech Circle Home Monitor

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Wedge the plastic opening tool under the black circle lens to gently pry it off.
  • The lens is only attached with sticky tape and should remove relatively easily.

Wedge the plastic opening tool under the black circle lens to gently pry it off.

The lens is only attached with sticky tape and should remove relatively easily.

1024

Step 2

  • Remove the four 3mm Phillips #0 screws that hold down the first ring.

Remove the four 3mm Phillips #0 screws that hold down the first ring.

Step 3

  • Remove the four 3mm Phillips #0 screws that hold down the second ring.

Remove the four 3mm Phillips #0 screws that hold down the second ring.

Step 4

  • Remove the four 3mm Phillips #0 screws that hold down the final ring. Do not remove the lens/battery bundle yet.
  • The lens/battery bundle is attached to the base by a ribbon cable that can break, so be very careful handling the circle.

Remove the four 3mm Phillips #0 screws that hold down the final ring. Do not remove the lens/battery bundle yet.

The lens/battery bundle is attached to the base by a ribbon cable that can break, so be very careful handling the circle.

Step 5

  • Gently remove the lens/battery bundle from the base of the circle, being mindful of the ribbon cable.

Gently remove the lens/battery bundle from the base of the circle, being mindful of the ribbon cable.

Step 6

  • Gently pull the ribbon cable loose from the lens/battery bundle.
  • While this is not an entirely necessary step, it helps to ensure the ribbon cable will not break during the rest of the replacement.

Gently pull the ribbon cable loose from the lens/battery bundle.

While this is not an entirely necessary step, it helps to ensure the ribbon cable will not break during the rest of the replacement.

Step 7

  • Locate the speaker attachment, and carefully remove the speaker plug from the lens.

Locate the speaker attachment, and carefully remove the speaker plug from the lens.

Step 8

  • Remove the speaker using a plastic opening tool. The battery is attached with glue, so use gentle prying motions to remove speaker.

Remove the speaker using a plastic opening tool. The battery is attached with glue, so use gentle prying motions to remove speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Emma Cochran

Member since: 09/28/2017

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Maine, Team S1-G4, Diaz Fall 2017                        

                                                  Member of University of Maine, Team S1-G4, Diaz Fall 2017 



                    UMAINE-DIAZ-F17S1G4                     


                                            3 Members                     


                                            7 Guides authored