Lite On Lightscribe Shm 165H6S Disc Tray Replacement Repair Guide

Featured

Featured Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

2

• Chassis
• 5 steps
• Disc Tray
• 2 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Featured Guide

This guide has been found to be exceptionally cool by the iFixit staff.

• BackLite-On LightScribe SHM-165H6S

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Chassis               

• Insert an open paper clip into the small hole on the left side of the faceplate.
• After the tray opens, extend it fully.

Insert an open paper clip into the small hole on the left side of the faceplate.

After the tray opens, extend it fully.

1024

Step 2

• Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

Step 3

• Pull the faceplate away from the main chassis.

Pull the faceplate away from the main chassis.

Step 4

• Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

Step 5

• Lift the top and bottom chassis straight up in order to remove them.

Lift the top and bottom chassis straight up in order to remove them.

Step 6

              Disc Tray               

• Extend the tray fully.
• Push the tab on the right side to the left.
• Push the tab on the left side to the left.
• Remove the tray carefully.

Extend the tray fully.

Push the tab on the right side to the left.

Push the tab on the left side to the left.

Remove the tray carefully.

Step 7

• Guide the replacement tray under the beige tabs.
• Make sure the grey piece is slid to the right, so the grey nob is under the right-hand groove of the tray.
• Check to see that the tray extends and closes smoothly.

Guide the replacement tray under the beige tabs.

Make sure the grey piece is slid to the right, so the grey nob is under the right-hand groove of the tray.

Check to see that the tray extends and closes smoothly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 10 other contributors 

                    James Biggs                     

Member since: 10/12/2011

596 Reputation

                                      3 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Cal Poly, Team 6-5, Regan Fall 2011                        

                                                  Member of Cal Poly, Team 6-5, Regan Fall 2011 



                    CPSU-REGAN-F11S6G5                     


                                            2 Members                     


                                            3 Guides authored