Linksys Wap54G Casing Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

1

• Casing
• 8 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackLinksys WAP54g

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Casing               

• Power down and unplug the device.

Power down and unplug the device.

1024

Step 2

• Start by removing the two black rubber stoppers that act as the cushions to the legs of the device. The stoppers are located on the bottom towards the front of the device.

Start by removing the two black rubber stoppers that act as the cushions to the legs of the device. The stoppers are located on the bottom towards the front of the device.

Step 3

• Once removed two small screws will be visible. With a small screwdriver unscrew the screws.

Once removed two small screws will be visible. With a small screwdriver unscrew the screws.

Step 4

• Remove the blue front panel from the rest of the device. You can now see the main board.

Remove the blue front panel from the rest of the device. You can now see the main board.

Step 5

• Now slide the bottom panel forward and remove it so the main board is attached to the bottom panel.

Now slide the bottom panel forward and remove it so the main board is attached to the bottom panel.

Step 6

• From here, remove the wires and nuts connected to the back panel of the casing by pulling the nuts through the holes in the casing.

From here, remove the wires and nuts connected to the back panel of the casing by pulling the nuts through the holes in the casing.

Step 7

• Once the bottom panel is removed unscrew the screws from the main board to the bottom panel so the main board is independent of the bottom panel.

Once the bottom panel is removed unscrew the screws from the main board to the bottom panel so the main board is independent of the bottom panel.

Step 8

• From here, all of the pieces of the casing are removed and the main board is independent of the entire casing.

From here, all of the pieces of the casing are removed and the main board is independent of the entire casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 6 other contributors 

                    Derek Myers                     

Member since: 10/04/2011

288 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 21-21, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 21-21, Maness Fall 2011 



                    CPSU-MANESS-F11S21G21                     


                                            5 Members                     


                                            6 Guides authored