Difficulty
Difficult
Steps
3
Time Required
Suggest a time??
Sections
1
- Arrow Button
- 3 steps
Flags
4
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackLightahead DV328
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
There is only one caution that should be noted when working on this device. Opening the cover, which contains the motherboard underneath, should be done with caution. If it is lifted up too much, the piece will snap in half.
What you need
Step 1
Arrow Button
- Use a spudger to remove the two screw covers.
- Remove the two Phillips #0 screws.
Use a spudger to remove the two screw covers.
Remove the two Phillips #0 screws.
1024
Step 2
- Once you are able to lift the cover up, you will then be able to pry off the lens which will allow for the device to open more.
- Take off the lens cover. Be careful not to pull the device open too much otherwise you will snap it in half since it is made of plastic.
- Once you have this up, pull up the cover and you will now be able to work on the arrow key button
Once you are able to lift the cover up, you will then be able to pry off the lens which will allow for the device to open more.
Take off the lens cover. Be careful not to pull the device open too much otherwise you will snap it in half since it is made of plastic.
Once you have this up, pull up the cover and you will now be able to work on the arrow key button
Step 3
- Lay the camcorder on its side. The arrow key button is now in full view.
- There is a small green piece locking in the arrow key button. Once you remove that, the piece will be able to come out.
- Gently push on the button and it will come out of the device. Replace as needed
Lay the camcorder on its side. The arrow key button is now in full view.
There is a small green piece locking in the arrow key button. Once you remove that, the piece will be able to come out.
Gently push on the button and it will come out of the device. Replace as needed
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Alexandra McMurray
Member since: 01/20/2016
355 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 10-2, Remmell Spring 2016
Member of USF Tampa, Team 10-2, Remmell Spring 2016
USFT-REMMELL-S16S10G2
3 Members
3 Guides authored