Difficulty

Easy

Steps

4

Time Required

                          10 - 20 minutes            

Sections

1

  • Battery
  • 4 steps

Flags

0

  • BackLifePrint 2x3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Orient the LifePrint 2x3 so that the top of the device is facing upwards. Slide the top cover toward the far side of the device and remove it.

Orient the LifePrint 2x3 so that the top of the device is facing upwards. Slide the top cover toward the far side of the device and remove it.

1024

Step 2

  • Remove the six 5.24 mm screws located around the edges of the device using a Phillips #00 Screwdriver.

Remove the six 5.24 mm screws located around the edges of the device using a Phillips #00 Screwdriver.

Step 3

  • Flip the LifePrint 2x3 upside down. Using a plastic opening pick, separate the bottom cover from the device and remove it.

Flip the LifePrint 2x3 upside down. Using a plastic opening pick, separate the bottom cover from the device and remove it.

Step 4

  • Using the angled tweezers grip the sides of the connector and slowly rock it side to side to remove. If the connector is not disconnecting, try using the spudger but be careful not to damage the motherboard.
  • Once disconnected, remove the old battery.

Using the angled tweezers grip the sides of the connector and slowly rock it side to side to remove. If the connector is not disconnecting, try using the spudger but be careful not to damage the motherboard.

Once disconnected, remove the old battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Alex Ephraim                     

Member since: 09/24/2019

160 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Embry-Riddle Aeronautical University, Team S15-G6, Lamothe Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S15-G6, Lamothe Fall 2019 



                    ERAU-LAMOTHE-F19S15G6                     


                                            4 Members                     


                                            3 Guides authored                     

martin.thomas - Aug 16, 2021

Reply

Hi. Where can you buy the replacement battery? Thank you.

lp1979 - Nov 13, 2022

Reply

Where can whe buy that battery?

Amelia Halliwell - Dec 9, 2022

Reply

Hi can I know where I can buy the battery?