Difficulty
Easy
Steps
6
Time Required
7 - 10 minutes
Sections
3
- Battery
- 2 steps
- Screen
- 2 steps
- Rear Facing Camera
- 2 steps
Flags
0
BackLG X Style
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Power down the device and make sure that it is turned off.
- Insert the plastic opening tool into the bracket space on the back bottom left of the phone.
- Gently twist tool clockwise until the back case pops open [this will create a small gap].
- Slide the tool along the gap around the entire device.
Power down the device and make sure that it is turned off.
Insert the plastic opening tool into the bracket space on the back bottom left of the phone.
Gently twist tool clockwise until the back case pops open [this will create a small gap].
Slide the tool along the gap around the entire device.
1024
Step 2
- Insert the plastic opening tool into the indent below the battery, and pry up to lift and remove the battery.
Insert the plastic opening tool into the indent below the battery, and pry up to lift and remove the battery.
Step 3
Screen
- With a Phillips #000 screwdriver, remove the twelve 3mm screws.
With a Phillips #000 screwdriver, remove the twelve 3mm screws.
Step 4
- Create a gap with plastic opening tool by applying pressure between glass screen and plastic edge of device.
- Slide prying tool around entire device beginning toward the top.
- Lift off and remove the screen from the device.
Create a gap with plastic opening tool by applying pressure between glass screen and plastic edge of device.
Slide prying tool around entire device beginning toward the top.
Lift off and remove the screen from the device.
Step 5
Rear Facing Camera
- Gently use the plastic opening tool to pinch off camera connection tab from motherboard.
Gently use the plastic opening tool to pinch off camera connection tab from motherboard.
Step 6
- With the plastic opening tool, gently lift up camera housing and remove.
With the plastic opening tool, gently lift up camera housing and remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
cecilia morales
Member since: 04/09/2018
361 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S1-G2, Carnegie Spring 2018
Member of Eastern Washington University, Team S1-G2, Carnegie Spring 2018
EWU-CARNEGIE-S18S1G2
4 Members
10 Guides authored