Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
3
- LG X Power Disassembly
- 3 steps
- Battery
- 4 steps
- Screen
- 2 steps
Flags
0
BackLG X Power
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LG X Power Disassembly
- Insert a plastic opening tool above the AUX jack and slide it around the perimeter to pop the back cover off.
Insert a plastic opening tool above the AUX jack and slide it around the perimeter to pop the back cover off.
1024
Step 2
- Remove the twelve 2.5mm Phillips #0 screws from the back of the phone.
Remove the twelve 2.5mm Phillips #0 screws from the back of the phone.
Step 3
- Insert a plastic opening tool underneath the mid-frame and pry upwards until you hear a click.
- With the plastic opening tool still underneath the mid-frame, work your way around the perimeter until it’s free from the smartphone.
Insert a plastic opening tool underneath the mid-frame and pry upwards until you hear a click.
With the plastic opening tool still underneath the mid-frame, work your way around the perimeter until it’s free from the smartphone.
Step 4
Battery
- Use the flat end of a spudger to disconnect the front and rear cameras from the motherboard.
- Pull the cameras out to remove them.
Use the flat end of a spudger to disconnect the front and rear cameras from the motherboard.
Pull the cameras out to remove them.
Step 5
- Use the flat end of a spudger to disconnect the battery from the motherboard.
- You will not be removing anything, just disconnecting.
Use the flat end of a spudger to disconnect the battery from the motherboard.
You will not be removing anything, just disconnecting.
Step 6
- Insert a plastic opening tool underneath the motherboard and pry upwards to remove it.
Insert a plastic opening tool underneath the motherboard and pry upwards to remove it.
Step 7
- Use a spudger and plastic opening tool to carefully pry up the battery.
- There is a strong adhesive on the back of the battery that will make it difficult to remove.
Use a spudger and plastic opening tool to carefully pry up the battery.
There is a strong adhesive on the back of the battery that will make it difficult to remove.
Step 8
Screen
- Carefully peal off the glued vibration motor by using the plastic opening tool.
Carefully peal off the glued vibration motor by using the plastic opening tool.
Step 9
- Using the plastic opening tool, pry off the ear speaker.
Using the plastic opening tool, pry off the ear speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
16 other people completed this guide.
Author
with 4 other contributors
khaled Albannaw
Member since: 02/14/2018
362 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
USF Tampa, Team S3-G6, Nance Spring 2018
Member of USF Tampa, Team S3-G6, Nance Spring 2018
USFT-NANCE-S18S3G6
3 Members
12 Guides authored
asears - Aug 17, 2018
Reply
If you are just replacing the screen, this is wrong. This would help if you are replacing with a “screen in frame”
Kodi Butscha - Mar 11, 2020
What is the right way for just the screen?
rian_bay - Oct 16, 2018
Reply
Please add “with frame” in title. Also need to make sure all contacts are present on the frame of the new screen, transfer them over if not.
Jonathan - Dec 4, 2018
Reply
Is the x power screen the same size ( or same screen altogether) as the x power 3 screen? If not what screen would I be looking for?
A Mix Of Geek Stuff - Mar 12, 2021
Reply
Where’s the part where you actually remove the screen and add in the new one?
The last step seems to be prying off the ear speaker.
Could you please fix this guide when you get the chance? I might replace the screen on my LG Power X [K210]. Thanks.