Difficulty
Moderate
Steps
9
Time Required
15 - 30 minutes
Sections
3
- Battery
- 2 steps
- Keypad
- 5 steps
- Motherboard
- 2 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackLG VX8700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure the phone is completely off.
- Remove the back cover by sliding the tab away from the phone using one finger.
Make sure the phone is completely off.
Remove the back cover by sliding the tab away from the phone using one finger.
1024
Step 2
- Lift one side of the battery using a plastic opening tool or your fingers.
- Carefully remove the battery and set it aside.
- When installing the new battery, make sure to align the metal pins with those of the phone.
Lift one side of the battery using a plastic opening tool or your fingers.
Carefully remove the battery and set it aside.
When installing the new battery, make sure to align the metal pins with those of the phone.
Step 3
Keypad
- Remove the nine 4 mm screws from the back cover with a Phillips #0 screwdriver.
Remove the nine 4 mm screws from the back cover with a Phillips #0 screwdriver.
Step 4
- Insert the tip of the iFixit opening tool into the small notch on the side of the case.
- Slide the opening tool along the seam and around the edge of the phone to separate the case.
Insert the tip of the iFixit opening tool into the small notch on the side of the case.
Slide the opening tool along the seam and around the edge of the phone to separate the case.
Step 5
- Separate the two halves of the phone.
- The back of the phone, which houses the motherboard and keypad, is displayed on the left.
- The plastic casing is displayed on the right.
Separate the two halves of the phone.
The back of the phone, which houses the motherboard and keypad, is displayed on the left.
The plastic casing is displayed on the right.
Step 6
- Hold the phone casing with one hand and the keypad assembly with the other.
- Separate the phone casing from the keypad/motherboard.
Hold the phone casing with one hand and the keypad assembly with the other.
Separate the phone casing from the keypad/motherboard.
Step 7
- Pull the two boards apart to separate the keypad from the motherboard.
Pull the two boards apart to separate the keypad from the motherboard.
Step 8
Motherboard
- First, pull back the tape covering the connection between the motherboard and the ribbon cable.
- Separate the connection, using the plastic opening tool.
First, pull back the tape covering the connection between the motherboard and the ribbon cable.
Separate the connection, using the plastic opening tool.
Step 9
- After the connection is removed, the motherboard is successfully removed.
After the connection is removed, the motherboard is successfully removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Stanley Thomas
Member since: 01/20/2012
41 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 8-16, Maness Winter 2012
Member of Cal Poly, Team 8-16, Maness Winter 2012
CPSU-MANESS-W12S8G16
4 Members
14 Guides authored