Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
3
- Battery
- 2 steps
- Front Bezel
- 4 steps
- Ear Piece
- 2 steps
Flags
0
BackLG VX8700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure the phone is completely off.
- Remove the back cover by sliding the tab away from the phone using one finger.
Make sure the phone is completely off.
Remove the back cover by sliding the tab away from the phone using one finger.
1024
Step 2
- Lift one side of the battery using a plastic opening tool or your fingers.
- Carefully remove the battery and set it aside.
- When installing the new battery, make sure to align the metal pins with those of the phone.
Lift one side of the battery using a plastic opening tool or your fingers.
Carefully remove the battery and set it aside.
When installing the new battery, make sure to align the metal pins with those of the phone.
Step 3
Front Bezel
- Turn your phone around and open the flip phone.
- Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.
- Remove the two grey screw-covers at the bottom of the screen
Turn your phone around and open the flip phone.
Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.
Remove the two grey screw-covers at the bottom of the screen
Step 4
- Remove the screen by using the tab to eject the screen.
- There is a gap between the case and the screen near the ear piece
- Insert the plastic opening tool in the gap and pry the screen up.
- The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.
Remove the screen by using the tab to eject the screen.
There is a gap between the case and the screen near the ear piece
Insert the plastic opening tool in the gap and pry the screen up.
The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.
Step 5
- Unscrew the four corner 3.21mm screws to separate the the top cover of the phone
Unscrew the four corner 3.21mm screws to separate the the top cover of the phone
Step 6
- Turn your phone around
- Remove the top cover of the phone by inserting the plastic opening tool into the groove.
- Carefully open the cover.
Turn your phone around
Remove the top cover of the phone by inserting the plastic opening tool into the groove.
Carefully open the cover.
Step 7
Ear Piece
- Desolder the top ear piece using a soldering iron to remove the component
- The ear piece is the black component that is located at the top with black and red wires
Desolder the top ear piece using a soldering iron to remove the component
The ear piece is the black component that is located at the top with black and red wires
Step 8
- Remove the ear piece from the phone by lifting it using a plastic opening tool.
Remove the ear piece from the phone by lifting it using a plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Stanley Thomas
Member since: 01/20/2012
41 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 8-16, Maness Winter 2012
Member of Cal Poly, Team 8-16, Maness Winter 2012
CPSU-MANESS-W12S8G16
4 Members
14 Guides authored