Difficulty
Moderate
Steps
6
Time Required
15 minutes
Sections
2
- Battery
- 2 steps
- Plastic Screen Protector
- 4 steps
Flags
0
BackLG VX5600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold your phone with the back casing facing you and the bottom of the phone towards the sky.
- Push down on the cover and slide down to remove. You should only have to apply minimal pressure.
Hold your phone with the back casing facing you and the bottom of the phone towards the sky.
Push down on the cover and slide down to remove. You should only have to apply minimal pressure.
1024
Step 2
- Insert your finger into the small indentation above the battery.
- Push down on the battery and pull it away from the phone; it will pop out.
Insert your finger into the small indentation above the battery.
Push down on the battery and pull it away from the phone; it will pop out.
Step 3
Plastic Screen Protector
- Use tweezers to remove the two rubber covers found at the left and right corners below the inside screen.
Use tweezers to remove the two rubber covers found at the left and right corners below the inside screen.
Step 4
- Grasp the phone and rotate it 90 degrees counterclockwise for a better grip.
- Unscrew the two 3.0-mm Phillips #000 screws, found under the rubber covers at the bottom left and right corners.
- Some of the pictures show the bottom of the phone disassembled. It is unneccessary to disassemble the bottom of the phone for this guide.
Grasp the phone and rotate it 90 degrees counterclockwise for a better grip.
Unscrew the two 3.0-mm Phillips #000 screws, found under the rubber covers at the bottom left and right corners.
Some of the pictures show the bottom of the phone disassembled. It is unneccessary to disassemble the bottom of the phone for this guide.
Step 5
- Hold the opened phone upright.
- Use the spudger to pry around the edges of the phone and detach the tabs.
- Make sure all the tabs around the grey cover are detached. They are located on the top and on both sides of the screen.
Hold the opened phone upright.
Use the spudger to pry around the edges of the phone and detach the tabs.
Make sure all the tabs around the grey cover are detached. They are located on the top and on both sides of the screen.
Step 6
- Use your finger to lift up the grey plastic cover.
- Use the tweezers to grasp the plastic screen, and pull the plastic screen protector up and out of the phone.
- The plastic screen protector is adhered with glue to the back of the phone, so a little force is required to remove it.
Use your finger to lift up the grey plastic cover.
Use the tweezers to grasp the plastic screen, and pull the plastic screen protector up and out of the phone.
The plastic screen protector is adhered with glue to the back of the phone, so a little force is required to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Irena Tran
Member since: 06/04/2013
435 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
University of Kentucky Louisville, Team 1-5, Chamberlain Spring 2013
Member of University of Kentucky Louisville, Team 1-5, Chamberlain Spring 2013
LOUISVILLE-CHAMBERLAIN-S13S1G5
2 Members
12 Guides authored
