Difficulty
Moderate
Steps
7
Time Required
15 - 30 minutes
Sections
2
- Battery
- 2 steps
- Motherboard
- 5 steps
Flags
0
BackLG VX5600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold your phone with the back casing facing you and the bottom of the phone towards the sky.
- Push down on the cover and slide down to remove. You should only have to apply minimal pressure.
Hold your phone with the back casing facing you and the bottom of the phone towards the sky.
Push down on the cover and slide down to remove. You should only have to apply minimal pressure.
1024
Step 2
- Insert your finger into the small indentation above the battery.
- Push down on the battery and pull it away from the phone; it will pop out.
Insert your finger into the small indentation above the battery.
Push down on the battery and pull it away from the phone; it will pop out.
Step 3
Motherboard
- Grasp the edges of the phone with one hand.
- Unscrew the six 5.0-mm Phillips #000 screws located around each side of the back panel of the phone.
- The screws are tight, so you will have to use a little force when unscrewing them.
Grasp the edges of the phone with one hand.
Unscrew the six 5.0-mm Phillips #000 screws located around each side of the back panel of the phone.
The screws are tight, so you will have to use a little force when unscrewing them.
Step 4
- Insert the spudger into the tab at the top of the back panel and push to release the panel.
- The back panel will then lift away from the rest of the phone.
Insert the spudger into the tab at the top of the back panel and push to release the panel.
The back panel will then lift away from the rest of the phone.
Step 5
- Flip the phone open with the back side still facing you.
- Grasping the phone from underneath, use your fingers to push up on the keypad until the motherboard can be easily lifted up from the plastic outer casing of the phone.
- When you do this the plastic camera button will pop out. It is not directly attached to anything. Make sure to save it for reassembly because it must be placed back on its tab at the side with the camera icon facing right side up to work correctly.
Flip the phone open with the back side still facing you.
Grasping the phone from underneath, use your fingers to push up on the keypad until the motherboard can be easily lifted up from the plastic outer casing of the phone.
When you do this the plastic camera button will pop out. It is not directly attached to anything. Make sure to save it for reassembly because it must be placed back on its tab at the side with the camera icon facing right side up to work correctly.
Step 6
- With a pair of tweezers, pull the gold flex cable up disconnecting the motherboard.
With a pair of tweezers, pull the gold flex cable up disconnecting the motherboard.
Step 7
- Use your fingers to lift the motherboard up and away from the phone.
Use your fingers to lift the motherboard up and away from the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jessica Bradley
Member since: 06/04/2013
279 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
University of Kentucky Louisville, Team 1-5, Chamberlain Spring 2013
Member of University of Kentucky Louisville, Team 1-5, Chamberlain Spring 2013
LOUISVILLE-CHAMBERLAIN-S13S1G5
2 Members
12 Guides authored