Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
2
- Battery
- 1 step
- Mother Board
- 4 steps
Flags
0
BackLG VX5500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the battery cover by placing your thumb on the small ridge near the top of the phone back and push downward, exposing the battery.
- Our device did not come with a battery cover so it is not shown here.
- Remove the battery using your finger to pry it out of the battery housing.
Remove the battery cover by placing your thumb on the small ridge near the top of the phone back and push downward, exposing the battery.
Our device did not come with a battery cover so it is not shown here.
Remove the battery using your finger to pry it out of the battery housing.
1024
Step 2
Mother Board
- Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack.
- Unscrew the (4) 3.6mm screws using a #00 Phillip’s head screw driver.
Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack.
Unscrew the (4) 3.6mm screws using a #00 Phillip’s head screw driver.
Step 3
- Carefully pry off the phone’s backing using a plastic opening tool.
- Slip the tool into the crack between the keypad (front panel) and the back panel.
- Slide the tool along the sides of the phone to detach the tabs holding the backing on.
Carefully pry off the phone’s backing using a plastic opening tool.
Slip the tool into the crack between the keypad (front panel) and the back panel.
Slide the tool along the sides of the phone to detach the tabs holding the backing on.
Step 4
- Peel back the sticker with tweezers and hold it back with your finger.
- Use the tweezers to lift the display adapter off the logic board.
Peel back the sticker with tweezers and hold it back with your finger.
Use the tweezers to lift the display adapter off the logic board.
Step 5
- Lift the mother board out of the phone casing.
- The keyboard can be easily removed once the mother board is out of the phone.
Lift the mother board out of the phone casing.
The keyboard can be easily removed once the mother board is out of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Henry
Member since: 04/12/2012
181 Reputation
3 Guides authored
Badges:
2
Team
Cal Poly, Team 7-33, Maness Spring 2012
Member of Cal Poly, Team 7-33, Maness Spring 2012
CPSU-MANESS-S12S7G33
4 Members
10 Guides authored
Kurt Beske - May 7, 2012
Reply
You guys are great!
Erik Sodders - Dec 16, 2016
Reply
So what do you do with the mother board then?