Lg Volt Ls740 Charging Port Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

1

• Charging Port
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackLG Volt LS740

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Couldn’t find any instructions here so I’m uploading some.

Please Ignore the goofy white borders, forgot to consider aspect ratio when taking the pictures

What you need

Step 1

              Power off and Unplug Phone               

• Always power off and unplug your devices before servicing them.

Always power off and unplug your devices before servicing them.

1024

Step 2

              Remove Rear Cover               

• There is a pry tab you can use your fingernail or a pry tool to remove the rear cover.

There is a pry tab you can use your fingernail or a pry tool to remove the rear cover.

Step 3

              Remove Battery & Sim Card               

• Note the location of the screws to remove the inner rear panel.

Note the location of the screws to remove the inner rear panel.

Step 4

              Remove Inner Rear Cover               

• Remove the 11 screws on the inside rear cover using your Phillips screw driver.
• See photo from “Remove Battery” step for location of screws.
• Use your pry tool and carefully work your way around the inside rear cover to undo the snaps and remove it.

Remove the 11 screws on the inside rear cover using your Phillips screw driver.

See photo from “Remove Battery” step for location of screws.

Use your pry tool and carefully work your way around the inside rear cover to undo the snaps and remove it.

Step 5

              Remove Charing Port / Daughter Board               

• Disconnect the 3 cables and two screws before attempting to remove the charging port circuitry.
• Beware the adhesive on the back!

Disconnect the 3 cables and two screws before attempting to remove the charging port circuitry.

Beware the adhesive on the back!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    SMcC21985                     

Member since: 11/10/2015

1,239 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges