Difficulty

Moderate

Steps

4

Time Required

                          7 - 10 minutes

Sections

2

  • Battery
  • 2 steps
  • Dual Front Cameras
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLG V10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Wedge the flat end of the plastic spudger, or the tip of your finger, in between the back cover and the LG V10’s charging port.
  • If using a spudger, it should not be in the charging port, but between the metal lining of the charging port and the back cover.
  • Carefully lift up on the spudger or with your finger so that the back cover pops up. The rest of the back cover should easily come off by sliding a finger or spudger under the back cover and around the sides.

Wedge the flat end of the plastic spudger, or the tip of your finger, in between the back cover and the LG V10’s charging port.

If using a spudger, it should not be in the charging port, but between the metal lining of the charging port and the back cover.

Carefully lift up on the spudger or with your finger so that the back cover pops up. The rest of the back cover should easily come off by sliding a finger or spudger under the back cover and around the sides.

1024

Step 2

  • There’s an impression next to the battery for the user to use their finger to pry the battery out; pry the battery out using your finger or the flat end of the spudger.

There’s an impression next to the battery for the user to use their finger to pry the battery out; pry the battery out using your finger or the flat end of the spudger.

Step 3

              Dual Front Cameras
  • Using a screwdriver with a J000 Phillips bit, remove fourteen 3.175 mm screws.
  • Using a plastic opening tool, pry part of the panel up starting from the sides of the battery slot.
  • Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens.

Using a screwdriver with a J000 Phillips bit, remove fourteen 3.175 mm screws.

Using a plastic opening tool, pry part of the panel up starting from the sides of the battery slot.

Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens.

Step 4

  • Using the flat end of a plastic spudger or a plastic opening tool, wedge it under the front cameras’ motherboard connection and disconnect it.

Using the flat end of a plastic spudger or a plastic opening tool, wedge it under the front cameras’ motherboard connection and disconnect it.

After replacing the dual front cameras, follow these instructions in reverse order to reassemble the LG V10.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Joseph

Member since: 09/25/2017

939 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team S16-G3, Eyestone Fall 2017                        

                                                  Member of USF Tampa, Team S16-G3, Eyestone Fall 2017 



                    USFT-EYESTONE-F17S16G3                     


                                            2 Members                     


                                            8 Guides authored