Difficulty

Moderate

Steps

4

Time Required

                          10 - 30 minutes

Sections

1

  • LG TV 49SJ8000 - WiFi module disassembly
  • 4 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLG TV 49SJ8000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LG TV 49SJ8000 - WiFi module disassembly
  • Place the display on a soft surface in order to help prevent scratches and/or breaking the display.
  • Remove the 4 Phillips screws that hold the stand in place (if installed).
  • Remove all screws from the rear panel.
  • There are two screws near to the input and output connectors.
  • On the lower part of the TV (next to the speakers) there are two additional screws that need to be removed.

Place the display on a soft surface in order to help prevent scratches and/or breaking the display.

Remove the 4 Phillips screws that hold the stand in place (if installed).

Remove all screws from the rear panel.

There are two screws near to the input and output connectors.

On the lower part of the TV (next to the speakers) there are two additional screws that need to be removed.

1024

Step 2

  • With the panel removed, its possible to visualize the boards and its connections.
  • To the left, there is the power supply, which supplies power to the TV.
  • To the right, there is the logic board.
  • On the lower section you can locate both speakers.
  • Between both speakers you can find the Wi-Fi and Bluetooth module.

With the panel removed, its possible to visualize the boards and its connections.

To the left, there is the power supply, which supplies power to the TV.

To the right, there is the logic board.

On the lower section you can locate both speakers.

Between both speakers you can find the Wi-Fi and Bluetooth module.

Step 3

  • To remove the Wi-Fi and Bluetooth module, there is only one screw holding the entirety of the structure.

To remove the Wi-Fi and Bluetooth module, there is only one screw holding the entirety of the structure.

Step 4

  • Wi-Fi module removed.
  • If your TV shows the message Device Connected/Device Disconnected, Wi-Fi not working or Magic remote not working, its possible that there is a bad connection on the module.
  • Remove the flex cables carefully and install them once again.
  • In order to remove the flex cable, there is a little tab that needs to be lifted.

Wi-Fi module removed.

If your TV shows the message Device Connected/Device Disconnected, Wi-Fi not working or Magic remote not working, its possible that there is a bad connection on the module.

Remove the flex cables carefully and install them once again.

In order to remove the flex cable, there is a little tab that needs to be lifted.

To reassemble your device, follow this instructions in inverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Guilherme Santos

Udo Baingo

ryanlameiro

Author

                                      with 1 other contributor 


                    Diogo Cordova

Member since: 04/29/2012

166 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges