Difficulty

Moderate

Steps

10

Time Required

                          5 - 15 minutes

Sections

2

  • Battery and SD Card
  • 2 steps
  • Flex Cable
  • 8 steps

Flags

0

  • BackLG Tribute HD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery and SD Card
  • Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.

Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.

1024

Step 2

  • Pull the battery out of the phone.
  • Remove the SD Card by sliding the card out as shown.

Pull the battery out of the phone.

Remove the SD Card by sliding the card out as shown.

Step 3

              Flex Cable
  • Remove the twelve 2mm JIS #00 screws from the mid-frame.

Remove the twelve 2mm JIS #00 screws from the mid-frame.

Step 4

  • Using a plastic opening tool, remove the antenna extender from the bottom.

Using a plastic opening tool, remove the antenna extender from the bottom.

Step 5

  • Using your fingers, remove the mid-frame.

Using your fingers, remove the mid-frame.

Step 6

  • Use a plastic opening tool to disconnect the front and rear cameras from the motherboard.
  • Remove the cameras from the phone.

Use a plastic opening tool to disconnect the front and rear cameras from the motherboard.

Remove the cameras from the phone.

Step 7

  • Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.

Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.

Step 8

  • Disconnect the LCD from the motherboard with a plastic opening tool.

Disconnect the LCD from the motherboard with a plastic opening tool.

Step 9

  • Use a plastic opening tool to pry up the motherboard form the display housing.
  • Remove the motherboard from the phone.

Use a plastic opening tool to pry up the motherboard form the display housing.

Remove the motherboard from the phone.

Step 10

  • Use your fingers to remove the flex cables from the phone.

Use your fingers to remove the flex cables from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Dhruv Patel

Member since: 02/14/2018

273 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S1-G3, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S1-G3, Nance Spring 2018 



                    USFT-NANCE-S18S1G3                     


                                            4 Members                     


                                            20 Guides authored