Difficulty
Moderate
Steps
9
Time Required
5 - 15 minutes
Sections
2
- Battery
- 2 steps
- Motherboard
- 7 steps
Flags
0
BackLG Tribute 5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using an iFixit opening tool, gently pull outward on the cutout on the bottom left corner of the phone to remove the back cover.
Using an iFixit opening tool, gently pull outward on the cutout on the bottom left corner of the phone to remove the back cover.
1024
Step 2
- Gently lift the battery out from the compartment.
- Use an iFixit opening tool to slide out the SD card and nano sim card from the device as shown.
Gently lift the battery out from the compartment.
Use an iFixit opening tool to slide out the SD card and nano sim card from the device as shown.
Step 3
Motherboard
- Remove the nine 2mm JIS #00 screws from the mid-frame.
Remove the nine 2mm JIS #00 screws from the mid-frame.
Step 4
- Using an iFixit opening tool, remove the antenna extender located at the bottom.
Using an iFixit opening tool, remove the antenna extender located at the bottom.
Step 5
- Gently remove the mid-frame using an iFixit opening tool as shown.
- Avoid applying too much force when separating the mid frame. Too much force can bend or damage the device.
Gently remove the mid-frame using an iFixit opening tool as shown.
Avoid applying too much force when separating the mid frame. Too much force can bend or damage the device.
Step 6
- Using an iFixit opening tool, gently disconnect the rear camera from the top center of the motherboard.
- Remove the front facing camera from the top right corner of the motherboard.
Using an iFixit opening tool, gently disconnect the rear camera from the top center of the motherboard.
Remove the front facing camera from the top right corner of the motherboard.
Step 7
- Gently pull the speaker out from its compartment with the iFixit opening tool.
Gently pull the speaker out from its compartment with the iFixit opening tool.
Step 8
- Disconnect the flex cable from the motherboard with the iFixit opening tool.
Disconnect the flex cable from the motherboard with the iFixit opening tool.
Step 9
- Gently pull up and remove the motherboard using the iFixit opening tool.
Gently pull up and remove the motherboard using the iFixit opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Renee Dawn Nelson
Member since: 04/22/2019
442 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
UW Tacoma, Team S1-G6, Cardinal Spring 2019
Member of UW Tacoma, Team S1-G6, Cardinal Spring 2019
UWT-CARDINAL-S19S1G6
3 Members
10 Guides authored