Difficulty
Moderate
Steps
4
Time Required
30 minutes
Sections
1
- Battery
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLG Tone Infinim HBS-910
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Locate right side.
- Battery is on right side of headset.
- First remove rubber cover on the right side of the headset to uncover the hidden screw.
- Remove screw using Philips PH00 screwdriver.
Battery is on right side of headset.
First remove rubber cover on the right side of the headset to uncover the hidden screw.
Remove screw using Philips PH00 screwdriver.
1024
Step 2
Disassemble right side.
- Use a guitar pick or any opening tool to pry open the right side.
Use a guitar pick or any opening tool to pry open the right side.
Step 3
Hidden screw.
- Once you have opened the right side up until the speaker end, there will be a hidden screw that needs to be unscrewed before the right side can be completely disassembled.
- Pry open the speaker back housing with a guitar pick or any opening tool as shown in the picture.
- Once the speaker back housing is lifted, you will see the screw.
- Remove the screw and the whole right side will be disassembled.
Once you have opened the right side up until the speaker end, there will be a hidden screw that needs to be unscrewed before the right side can be completely disassembled.
Pry open the speaker back housing with a guitar pick or any opening tool as shown in the picture.
Once the speaker back housing is lifted, you will see the screw.
Remove the screw and the whole right side will be disassembled.
Step 4
Desolder battery.
- Use a non-metal tool to lift the battery out of place so it will be easy to desolder.
- Remember the red wire is positive(+) and the black wire is negative(-).
Use a non-metal tool to lift the battery out of place so it will be easy to desolder.
Remember the red wire is positive(+) and the black wire is negative(-).
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
Author
with 1 other contributor
Faizan Naveed
Member since: 04/12/2017
3,226 Reputation
8 Guides authored
Badges:
15
+12 more badges
Team
Mobile Device Repair Factory
Member of Mobile Device Repair Factory
Business
1 Member
16 Guides authored
honda kung - Jan 24, 2018
Reply
Battery model and amps
Rafael Zerbini - Dec 3, 2018
Reply
Hello budy!
Tanks for the guide, i was going crazy looking for that hidden screw!
You might be able to help me. Would you know what i must look for a malfunctioning earbud? My right one suddenly died and im hoping the cord isn’t broken and its just some loose weld.