Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes

Sections

4

  • Battery
  • 2 steps
  • Speaker
  • 2 steps
  • Phone Buttons
  • 3 steps
  • SIM/Micro SD Card
  • 2 steps

Flags

0

  • BackLG Thrill 4G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover Removal
  • Pry open the back cover by using a fingernail or a plastic opening tool.
  • There is a small notch at the bottom of the cover for easy removal.

Pry open the back cover by using a fingernail or a plastic opening tool.

There is a small notch at the bottom of the cover for easy removal.

1024

Step 2

              Battery Removal
  • Remove the battery from the phone.
  • There is a small ledge located at the bottom of the battery for easy removal.

Remove the battery from the phone.

There is a small ledge located at the bottom of the battery for easy removal.

Step 3

              Screw Removal
  • Remove the three Philips #00 screws from the bottom of the phone.
  • Two 5.5 mm screws
  • One 4 mm screw

Remove the three Philips #00 screws from the bottom of the phone.

Two 5.5 mm screws

One 4 mm screw

Step 4

              Speaker Removal
  • Use your finger or opening tool to wedge the speaker out starting at the small notch at the bottom of the phone.

Use your finger or opening tool to wedge the speaker out starting at the small notch at the bottom of the phone.

Step 5

              Buttons
  • Remove the three buttons from the side and the top of the phone.
  • Power button
  • Volume button
  • 3D camera button

Remove the three buttons from the side and the top of the phone.

Power button

Volume button

3D camera button

Step 6

  • Place the plastic opening tool under the bezel at either bottom corner of the HDMI cover.
  • This loosens both the HDMI and USB covers for easy removal.
  • USB Cover
  • HDMI Cover

Place the plastic opening tool under the bezel at either bottom corner of the HDMI cover.

This loosens both the HDMI and USB covers for easy removal.

USB Cover

HDMI Cover

Step 7

  • Remove the six Phillips #00 screws within the mid-cover bezel.

Remove the six Phillips #00 screws within the mid-cover bezel.

Step 8

              Ribbon Cable Disconnection
  • Utilize a spudger or plastic opening tool and gently disconnect the ribbon cable that is attached to the black micro-SIM card board.

Utilize a spudger or plastic opening tool and gently disconnect the ribbon cable that is attached to the black micro-SIM card board.

Step 9

              SD/SIM Card Board Removal
  • Carefully pry the board up to detach it from its place in the phone.
  • Make sure to pry off the small tab connected to the camera unit as well.

Carefully pry the board up to detach it from its place in the phone.

Make sure to pry off the small tab connected to the camera unit as well.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Khbero Baker

Member since: 01/19/2015

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-6, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 1-6, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S1G6                     


                                            3 Members                     


                                            10 Guides authored