Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes

Sections

6

  • Back Cover
  • 1 step
  • Battery
  • 1 step
  • Rear Camera
  • 2 steps
  • Front Camera
  • 1 step
  • Motherboard
  • 1 step
  • Top Speaker
  • 1 step

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLG Stylo 3 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Power off the phone before beginning disassembly.
  • Place the phone face down.
  • Insert a fingernail or a plastic opening tool into the gap on the side of the phone.
  • Carefully slide your finger or the tool throughout the edge of the phone to ease the back case off.

Power off the phone before beginning disassembly.

Place the phone face down.

Insert a fingernail or a plastic opening tool into the gap on the side of the phone.

Carefully slide your finger or the tool throughout the edge of the phone to ease the back case off.

1024

Step 2

              Battery
  • Place the back cover off to the side.
  • Insert the opening tool into the small gap below the battery.
  • Carefully pop the battery out to prevent damage.

Place the back cover off to the side.

Insert the opening tool into the small gap below the battery.

Carefully pop the battery out to prevent damage.

Step 3

              Rear Camera
  • Remove the twelve 4mm screws using the Phillips #000 screwdriver.
  • Use the plastic opening tool to remove the inner case.
  • Carefully remove the inner case.

Remove the twelve 4mm screws using the Phillips #000 screwdriver.

Use the plastic opening tool to remove the inner case.

Carefully remove the inner case.

Step 4

  • Use your fingernail or the plastic opening tool to flip the flex cable.
  • Use the precision tweezers to carefully grasp and pull out the camera.

Use your fingernail or the plastic opening tool to flip the flex cable.

Use the precision tweezers to carefully grasp and pull out the camera.

Step 5

              Front Camera
  • Carefully flip open the flex cable box with the plastic opening tool.
  • Using precision tweezers, carefully lift the front camera off the device.

Carefully flip open the flex cable box with the plastic opening tool.

Using precision tweezers, carefully lift the front camera off the device.

Step 6

              Motherboard
  • Gently flip open the flex cable box using a blue plastic opening tool.
  • Carefully remove the motherboard with your hands or a blue plastic opening tool.
  • Make sure all parts are secure while taking out motherboard.

Gently flip open the flex cable box using a blue plastic opening tool.

Carefully remove the motherboard with your hands or a blue plastic opening tool.

Make sure all parts are secure while taking out motherboard.

Step 7

              Top Speaker
  • Remove the top speaker.

Remove the top speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Dillon Cooper

Member since: 09/19/2019

175 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       University of North Alabama, Team S1-G3, Winner Fall 2019                        

                                                  Member of University of North Alabama, Team S1-G3, Winner Fall 2019 



                    UNA-WINNER-F19S1G3                     


                                            3 Members                     


                                            6 Guides authored

Misnelsys Olive - Jul 12, 2022

Reply

Hola gracia por el consejo el altavoz se le rompió a mi cell