Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
3
- Rear Case
- 1 step
- Battery
- 1 step
- Speaker
- 3 steps
Flags
0
BackLG Stylo 2 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
- With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
1024
Step 2
Battery
- To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
- Firmly grasp the battery and remove from the phone.
To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
Firmly grasp the battery and remove from the phone.
Step 3
Speaker
- Remove the cover from the phone in order to access the speaker.
- Using the JIS #000 screwdriver, remove the four 4mm screws around the base of the mid-frame.
Remove the cover from the phone in order to access the speaker.
Using the JIS #000 screwdriver, remove the four 4mm screws around the base of the mid-frame.
Step 4
- Insert the metal spudger in the dimple at the base of the mid-frame.
- Pry upward, removing bottom section of the mid-frame from the phone.
Insert the metal spudger in the dimple at the base of the mid-frame.
Pry upward, removing bottom section of the mid-frame from the phone.
Step 5
- Flip the bottom piece of the mid-frame over to show the speaker in the bottom right corner.
- Using the tweezers, peel back the rubber resting on top of the speaker.
- Still using the tweezers, grasp the speaker unit and remove it from the mid-frame.
Flip the bottom piece of the mid-frame over to show the speaker in the bottom right corner.
Using the tweezers, peel back the rubber resting on top of the speaker.
Still using the tweezers, grasp the speaker unit and remove it from the mid-frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Noah Kehm
Member since: 04/22/2019
241 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
UW Tacoma, Team S1-G3, Cardinal Spring 2019
Member of UW Tacoma, Team S1-G3, Cardinal Spring 2019
UWT-CARDINAL-S19S1G3
4 Members
14 Guides authored