Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
4
- Rear Case
- 1 step
- Battery
- 1 step
- Mid-Frame
- 2 steps
- Rear Camera
- 1 step
Flags
0
BackLG Stylo 2 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
- With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
1024
Step 2
Battery
- To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
- Firmly grasp the battery and remove from the phone.
To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
Firmly grasp the battery and remove from the phone.
Step 3
Mid-Frame
- Using the JIS #000 screwdriver, remove the eleven 4mm screws around the mid-frame.
Using the JIS #000 screwdriver, remove the eleven 4mm screws around the mid-frame.
Step 4
- Insert the metal spudger in the dimple at the base of the cover.
- Pry upward, removing the mid-frame from the phone.
Insert the metal spudger in the dimple at the base of the cover.
Pry upward, removing the mid-frame from the phone.
Step 5
Rear Camera
- Flip the cover over to show the rear camera unit in the center of the cover.
- Using the tweezers, carefully grab the rear camera unit and pull directly upward, removing the unit from the cover housing.
Flip the cover over to show the rear camera unit in the center of the cover.
Using the tweezers, carefully grab the rear camera unit and pull directly upward, removing the unit from the cover housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Noah Kehm
Member since: 04/22/2019
241 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
UW Tacoma, Team S1-G3, Cardinal Spring 2019
Member of UW Tacoma, Team S1-G3, Cardinal Spring 2019
UWT-CARDINAL-S19S1G3
4 Members
14 Guides authored